Hello Guest
« previous next »
Pages: [1]   Go Down

1.6 spool and 5.12?

  • 10 Replies
  • 2233 Views

0 Members and 1 Guest are viewing this topic.

*

Offline blakester1123

  • 95
  • 0
  • Gender: Male
  • 88 sammy 6in on 32s and rising
1.6 spool and 5.12?
« on: September 14, 2006, 09:50:30 AM »
does anyone run a 1.6 with spool in the rear with 5.12 gears and stock axles? Im interested in putting 5.12s im my sammi but worried about breaking rear ends and driveshafts with the spool and the 1.6 and 31.5 mud terrains. id like to hear from some people that run this setup
Logged
*

Offline 89tintop

  • 356
  • 1
  • Gender: Male
  • I Love ZUKIWORLD!
Re: 1.6 spool and 5.12?
« Reply #1 on: September 14, 2006, 11:11:22 AM »
hey man my camo tracker has brand new 32x9.5 swampers with a welded rear and 5.12's and i have had no problems.
Logged
91 kick 4 door 2 inch body lift, 2 inch spacer lift, 31's.
*

Offline FNG

  • 197
  • 0
  • Gender: Male
  • 91 TRACKER 6" LIFT ON 34S, SKID PLATES AND CAGE
Re: 1.6 spool and 5.12?
« Reply #2 on: September 14, 2006, 11:56:08 AM »
I run a spool in my tracker with 34s and 5.62 gear and have had no problems ;D
Logged
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: 1.6 spool and 5.12?
« Reply #3 on: September 14, 2006, 01:34:30 PM »
I run 33x12.5 in my SJ with 5.12 gears and a spool and the rear end has been rock solid.

The front end, now that needed the heavy duty axels after the locker was done with those little splines...  :D
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline Moallen

  • 68
  • 0
  • Gender: Male
  • I love YaBB 1G - SP1!
Re: 1.6 spool and 5.12?
« Reply #4 on: September 14, 2006, 03:20:08 PM »
I have 512's and run 31's with a locked front and rear on a sammi and no problems
Allen in Missouri
the land of the party cove
Logged
1987 Samurai 32" front and rear lockers 1.6 engine spring over lift 512 gears
2005 dodge dually 4x4 diesel
98 Jeep
1989 34' Stamas twin 225
20' Sea Ark boat 1989 toyota (beater car)  two cobra kayaks 28ft classic car haul kubota L2900 tractor
*

Offline Quaddawg

  • 1622
  • 1
  • Gender: Male
  • Flex and Ground Clearance is HIGHLY overrated!!
    • My Ebay Store
Re: 1.6 spool and 5.12?
« Reply #5 on: September 14, 2006, 03:36:59 PM »
Have run 5.12's  AND 5.62's with 31x11.50's  and a spool.

On and offroad... no problems yet in my Tracker
Logged
1996 Tracker Daily Driver, "The Flea"

Clicke HERE for Specs and Pics[/url]
*

Offline LawDog

  • 531
  • 0
  • Gender: Male
  • Lakeview Motor Sports' Makin it Hert! Tell u whut!
    • Emerling Chevrolet
Re: 1.6 spool and 5.12?
« Reply #6 on: September 15, 2006, 10:43:29 AM »
When I considered a spool for my Zuk, I was advised that because I drive it on the street too, a spool would be a pain in the a$$, and I'd risk breaking something.  I agreed, so I'll pass the info on to you.  Spend the x-tra coin and get an auto locker.
Logged
"I'm the Law 'round here" said the Duckshirt.

Get a Zuk, Get it dirty, Git-R-Done!!

At Lakeview Motor Sports we specialize in rediculousness, hackdome, and wasting your time.
*

Offline Quaddawg

  • 1622
  • 1
  • Gender: Male
  • Flex and Ground Clearance is HIGHLY overrated!!
    • My Ebay Store
Re: 1.6 spool and 5.12?
« Reply #7 on: September 15, 2006, 03:46:23 PM »
Quote from: LawDog on September 15, 2006, 10:43:29 AM
When I considered a spool for my Zuk, I was advised that because I drive it on the street too, a spool would be a pain in the a$$, and I'd risk breaking something.  I agreed, so I'll pass the info on to you.  Spend the x-tra coin and get an auto locker.

Yeah, but if you read all the posts above this... WE ALL used spools on the street.... so far so good?????
Logged
1996 Tracker Daily Driver, "The Flea"

Clicke HERE for Specs and Pics[/url]
*

Offline blakester1123

  • 95
  • 0
  • Gender: Male
  • 88 sammy 6in on 32s and rising
Re: 1.6 spool and 5.12?
« Reply #8 on: September 16, 2006, 01:59:29 PM »
the spool has been in for a while and the 1.6 is in i was wondering about the 5.12s, the spool is fine on the street its kinda fun in parking lots when your rear tires are skidin as you turn and everyone is wondering whats wrong with your car :)
Logged
*

PSYKOCHI

Re: 1.6 spool and 5.12?
« Reply #9 on: September 19, 2006, 05:05:32 PM »
I have a 95 Tracker that I drag race with the 5:13 and mini-spool with 15x8in drag wheels w/28x9.0x15 Hoosier slicks.  I broke the the left stock axle with 7inch street tires.  I went with the Calmini 4140 axles back in Feb. 06 -- so far no problem.   
Logged
*

Offline blakester1123

  • 95
  • 0
  • Gender: Male
  • 88 sammy 6in on 32s and rising
Re: 1.6 spool and 5.12?
« Reply #10 on: September 19, 2006, 11:05:20 PM »
nice what does it run in a 1/4 mile?
Logged
Pages: [1]   Go Up
« previous next »