Hello Guest
« previous next »
Pages: [1]   Go Down

Motor mount

  • 4 Replies
  • 1164 Views

0 Members and 1 Guest are viewing this topic.

*

Offline 96Kicker

  • 1043
  • 0
  • Gender: Male
  • http://www.zukiworld.com/forum/gallery/3710_25_10_
    • www.myspace.com
Motor mount
« on: October 04, 2006, 11:17:11 AM »
Just curious if anyone has had to change the drivers side motor mount on a 94 track/kick with a 8 valve. Mine decided to go south on a bumpy road. I assume you just put a piece of wood under your engine and jack it up untill you have enough clearance to replace the mount.

Any ideas on this? Easier way?Hints?
Logged
<a href="http://s220.photobucket.com/albums/dd126/fletcher9160/?action=view&current=Zuktahgreenblur.jpg" target="_blank"><img src="http://i220.photobucket.com/albums/dd126/fletcher9160/Zuktahgreenblur.jpg" border="0" alt="Zuktah club sticker"></a>TJ
#801-554-3281
96 kick 4 door with custom 3 inch susp lift and pre runner front bumper,2 inch bod
*

Offline 96Kicker

  • 1043
  • 0
  • Gender: Male
  • http://www.zukiworld.com/forum/gallery/3710_25_10_
    • www.myspace.com
Re: Motor mount
« Reply #1 on: October 05, 2006, 04:32:21 PM »
28 views, come on people. Help a new guy out
Logged
<a href="http://s220.photobucket.com/albums/dd126/fletcher9160/?action=view&current=Zuktahgreenblur.jpg" target="_blank"><img src="http://i220.photobucket.com/albums/dd126/fletcher9160/Zuktahgreenblur.jpg" border="0" alt="Zuktah club sticker"></a>TJ
#801-554-3281
96 kick 4 door with custom 3 inch susp lift and pre runner front bumper,2 inch bod
*

Offline blakester1123

  • 95
  • 0
  • Gender: Male
  • 88 sammy 6in on 32s and rising
Re: Motor mount
« Reply #2 on: October 05, 2006, 05:06:44 PM »
that will work, loosen the bolts jack it up take the bolts out jack up more then pull out the mount  put the new one in and bolt it all up.
Logged
*

Offline 96Kicker

  • 1043
  • 0
  • Gender: Male
  • http://www.zukiworld.com/forum/gallery/3710_25_10_
    • www.myspace.com
Re: Motor mount
« Reply #3 on: October 06, 2006, 12:36:40 PM »
Thanks Blake
Logged
<a href="http://s220.photobucket.com/albums/dd126/fletcher9160/?action=view&current=Zuktahgreenblur.jpg" target="_blank"><img src="http://i220.photobucket.com/albums/dd126/fletcher9160/Zuktahgreenblur.jpg" border="0" alt="Zuktah club sticker"></a>TJ
#801-554-3281
96 kick 4 door with custom 3 inch susp lift and pre runner front bumper,2 inch bod
*

Offline crikeymike

  • 713
  • 0
  • Gender: Male
  • Local to Western Washington?? Visit WAZUKS.com
    • http://www.wazuks.com
Re: Motor mount
« Reply #4 on: October 06, 2006, 02:33:33 PM »
Yeah, it is easy.  Remove the mount from the engine and frame while the engine is supported, then match up the new one with the old for installation.
Logged
1993 4-door Sidekick
3" hybrid Calmini/OME lift, 2" B/L, Rear air locker
Shrockworks bar & sliders, Full skid plates
4.24:1 t-case
 WAZUKS member - visit http://www.wazuks.com
Pages: [1]   Go Up
« previous next »