its a 92 with 3in b/l and 2in spring spacers stock gears and 31x10.5 tires on 7in rims

looks nice, any trimming needed to clear the tires?

no trimming in fact with just the 3in b/l i was running the 31s with no problems but i wanted more height so i put the 2in j**p spring spacers in i am pretty sure i could run 33 with no trimming and 34s with some trimming not sure but she is gonna need some new shoes soon so i have to figure it out(33 or 34)

thats odd, on mine, with the 3" body lift on 31x10.50's i had to do some decent fender trimming in the front, i especially had to take and cut the extention piece off the front bumper that wraps around the side.

thats odd, on mine, with the 3" body lift on 31x10.50's i had to do some decent fender trimming in the front, i especially had to take and cut the extention piece off the front bumper that wraps around the side.

What is your rim width/backspacing?

the rims were on a samurai(not sure if they are 7's 8's) probably 8's though, that would explain it.

my rims are 7in wide.yes i did trim off the front bumper i cut it across the line all the way from one side to the other but no fender trimming i was wondering if maybe mine came taller from factory or something i think mine might of been made in canada any difference?

Nice looking truck.

What kind of trailer are you towing?

had to double take

thought you said 7" rims

ive towed a fullsize 1968 buick wildcat with my tracker, and a 14ft car hauler with a jeep cherokee on it.  they are pretty good haulers.