Hello Guest

where is tranny dipstick on 93 5 speed tracker?

  • 4 Replies
  • 1353 Views

0 Members and 1 Guest are viewing this topic.

*

Offline westvilleguy

  • 53
  • 0
  • Gender: Male
  • I Love ZUKIWORLD!
where is tranny dipstick on 93 5 speed tracker?
« on: December 13, 2006, 08:04:38 AM »
went to check my tranny fluid on a 93 tracker i just bought and cant find the dipstick anywhere it is right by the fire wall on both my automatics but cant find it on this 5 speed just wondering if it may be broke of or something or just in a different spot
89 chev tracker 4x4 tintop
91 gmc tracker 4x4 tintop
93 geo tracker 4x4 tin top
94 geo tracker 4x4 hard and soft top

*

Offline wheresmyhat

  • 244
  • 0
  • Gender: Male
  • 16v here I come baby!!!
Re: where is tranny dipstick on 93 5 speed tracker?
« Reply #1 on: December 13, 2006, 08:26:15 AM »
I know my samurai 5speed does not have one its just like checking the tcase or rearend you have to pull the fill plug on the side.

Should be the same way in the tracker and sidekicks.
86 sami 87 motor and a few other years in there probably, dana 44 rear,36"tsl. I once had splitfire spark plugs.

*

Offline RHodge

  • 523
  • 0
  • Gender: Male
Re: where is tranny dipstick on 93 5 speed tracker?
« Reply #2 on: December 13, 2006, 08:42:36 AM »
very few manual trans have dipsticks, I'v seen some on subaru's but thats about it


Ryan

*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: where is tranny dipstick on 93 5 speed tracker?
« Reply #3 on: December 13, 2006, 02:43:02 PM »
If you are a DIY kind of person, try this:

http://bbs.zuwharrie.com/content/topic,34535.0.html

Otherwise, the folks at your local quicky-lube place will be able to do it for you...


I found this link by searching for gear oil at Ack's FAQ...  ;D
Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com

*

Offline gearjam

  • 97
  • 1
  • Gender: Male
  • RC 2010
Re: where is tranny dipstick on 93 5 speed tracker?
« Reply #4 on: December 13, 2006, 04:06:13 PM »
It's on the right side about halfway back and is a square drive to turn it. I think a 3/8 ratchet fits.