Hello Guest

Anyone looking to buy a 2.5 Calmini Kit?

  • 15 Replies
  • 2930 Views

0 Members and 1 Guest are viewing this topic.

Anyone looking to buy a 2.5 Calmini Kit?
« on: February 23, 2007, 10:27:43 PM »
Howdy all, Just wondering if anyone is looking to buy a 2.5 Calmini kit. I have it installed on my 2000GV and I am considering making a change back to stock. I have had it in for less than a year. Minimal wheeling on it. Let me know if you are interested. Thanks.

*

Offline trackinstile

  • 435
  • 0
  • Gender: Male
  • Too young to quit........Too old to change........
Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #1 on: February 24, 2007, 05:41:25 AM »
Why are you going back to stock?  Dave ???
A wise man once said, "Wherever you go...........There you are.............." 2000 Tracker 4 door with the 2.0 liter "Big Block". 5 speed 4WD  2001 XL-7 EX II

Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #2 on: February 24, 2007, 08:10:03 AM »
Just not stoked on the quality of the kit or the service from Calmini. The whole situation has turned me off of wheeling honestly for the most part. It is a frustrating situation. Trust me I want nothing more than to enjoy the truck which is why I bought it. My bro has the same truck with the same kit and his is fine. I must have gotten shipped a crap run of springs and struts cause it sure isn't the same as his. I have tried everything short of finding some hack solution. That's not how I roll.

*

Offline stone

  • 86
  • 0
  • Gender: Male
  • offroaders a built not bought
Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #3 on: February 24, 2007, 12:50:51 PM »
How much u looking for it, and where are u located, and when u looking to unload it

*

Offline benzr2

  • 72
  • 0
  • Gender: Male
Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #4 on: February 24, 2007, 02:29:07 PM »
I have been looking for a used kit and definately want to buy it. Give me a price and include shipping to 20653 Maryland. I can send you Paypal if you want. Very Very interested!!! Thanks
2001 Tracker ZR2 235/75/15 ATs       1987 Samurai Tin Top     New Project!!

Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #5 on: February 25, 2007, 10:59:52 AM »
Hey guys, just out of town for the weekend and will be back at home tomorrow. I have just been doing some reading and have some found some tips that may help with my situation. I still have to figure out a fair price for the kit. Any ideas? I am on the west coast of Canada so I would have to investigate shipping prices to the states.

*

Offline stone

  • 86
  • 0
  • Gender: Male
  • offroaders a built not bought
Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #6 on: February 25, 2007, 12:16:21 PM »
Im in canada so it would work well for me as we wouldnt need to worrie about duty or anything

*

Offline bzzr2

  • 1011
  • 3
Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #7 on: February 26, 2007, 06:55:08 AM »
pm'd you.
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4

Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #8 on: February 27, 2007, 09:38:51 AM »
Don't give up yet...  Mine is starting to work out.  So far the rear solution is a lighter valved shock, for my setup.  I'm gonna work on the front again this wekend and will let you know how it goes.

Sean

*

Offline JDMCRX

  • 1110
  • 0
  • Gender: Male
  • 02 Grand Vitra Pimp lol
Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #9 on: February 28, 2007, 07:16:01 PM »
Im in ottawa how much for the kit .
01 GRAND VITARA

JBAUTO LONGTUBE HEADERS AND 2.5" JBAUTO EXHAUST

New project H27 in the GV goal 200 Wheel Horse Power  JPB 1.75"front 2" rear Grand Vitra lifts  www.jbauto.ca[/url]

*

Offline bzzr2

  • 1011
  • 3
Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #10 on: March 01, 2007, 06:20:19 AM »
i'm in ottawa too and still waiting to hear back from my pm!  get in line jdmcrx, actually - get your truck muddy 1st!!! 
« Last Edit: March 01, 2007, 06:31:49 AM by bzzr2 »
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4

Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #11 on: March 01, 2007, 07:21:16 PM »
Hey guys, After some consideration I would be hoping to get $1000 for my full Calmini lift kit. I am not sure if that is what you were thinking but that is what will make it worth my while to yank it out. That or I am trading the whole thing in. Let me know what you think.

*

Offline bzzr2

  • 1011
  • 3
Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #12 on: March 02, 2007, 06:18:13 AM »
the kits only run roughly 100 - 200 more new.  with struts that are not f'd as you describe in your another thread.  i'd consider 800bucks if you change your mind.
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4

Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #13 on: March 02, 2007, 07:13:35 AM »
I paid 1400 from North Shore Offroad out here in BC. I also have the Spidertrax Wheel spacers for it. Meet in the middle and call it 900? Let me know what you think about that.

*

Offline bzzr2

  • 1011
  • 3
Re: Anyone looking to buy a 2.5 Calmini Kit?
« Reply #14 on: March 02, 2007, 07:24:41 AM »
that changes things a bit, let me think about this over the weekend, cheers - B
03-ZR2, 2dr, 31x10.5 SSR's & stuff...--sold :-(
03 xl7, jeff's 2inch spacer lift, 225/75/16's; sold
09 taco reg cab short box 4x4