Anyone making these? I kinda recall someone was making them for around $50

Just having the plates pre-cut would be nice (I'm gunna want to offset them to get the pinion pointed at the tcase).

So, if anyone has plates or has patterns and can cut plates, let me know.

don't know if i should suggest this or not...

Boondox was willing to sell me one for $85-100 a year or two ago, ready to bolt in.  You could try try try try try to contact them and see what they say.

I think Whitfield had the measurements posted up somewhere with the hole sizes and all that.  Might have been on zuwharrie.

here are the dimensions for a solid block;
I had one made, but the long bolts took too much strain, so I has a replacement made with top and bottom plates and a box between them; sounds like you know what's necessary and so I hope that the measurements help

http://babelfish.altavista.com/babelfish/trurl_pagecontent?lp=pt_en&trurl=http%3a%2f%2fwww.cabrito.suzukioffroad.com.br%2fUpper%2520wishbone.htm