what kind of steering does it have?  welcome aboard!

stu

Welcome
Your missing front drive shaft might be due to the fact that lifted Samis tend to have problems with the shaft hitting the X-member. You can butcher the X-member or go this route: http://www.rock4xfabrication.com/transmount.htm
very nice
If your drive shaft angles are too severe (u-joint bind) you can try to clearance them a bit or go with a cv shaft:
http://www.rocky-road.com/zukdrive.html again, very nice
And finally, as long as you stay with the 32s, keep the stock axels. Sell the Toy axels to me

I should have read your profile first Welcome Banana Slug  

I don't like blocks. If you had that 3 inches in suspension, you would have a lot more flex If you remove the blocks, your 32s might rub. Post some pictures of the suspension and tire clearance.

Don't you like the slug pic

Thanks people!

Not sure on the steering I pretty sure its just stock.

And thanks for the links on the drive shaft I will check them out. I take it the toy axles are good cause everyone seems to want them!

Yes I dig on the banana slug! Go slugs!!!

I have taken a few pics with the disposable camera, I will finish the roll and get them put on disc so I can post them.

So as of now I'm gonna have the seat mounts welded, the nuts are coming loose and the mounts are ripping. I'm gonna go ahead in install the dash.

I have a buddy, Tdavis on the explorer board he also has a sammy, his is pretty pissed off and can crawl over almost anything. He may be lending me a hand. I will keep you guys posted and thanks again for everyones input and suggetions.