Hello Guest
« previous next »
Pages: [1]   Go Down

Need help with a part name

  • 10 Replies
  • 2338 Views

0 Members and 4 Guests are viewing this topic.

*

Yote

Need help with a part name
« on: February 25, 2008, 11:14:14 AM »
Trackers are new to me and I just want to be sure on the name of this part, I wanna say it's a rear control arm? sorry for the bad pic. Thanks.

Logged
*

mic

Re: Need help with a part name
« Reply #1 on: February 25, 2008, 11:43:48 AM »
I call it a rear v bar. Sounds good to me.
Logged
*

Offline crikeymike

  • 713
  • 0
  • Gender: Male
  • Local to Western Washington?? Visit WAZUKS.com
    • http://www.wazuks.com
Re: Need help with a part name
« Reply #2 on: February 27, 2008, 07:22:48 AM »
It's also referred to as "The upper link" or "upper a-arm".
Logged
1993 4-door Sidekick
3" hybrid Calmini/OME lift, 2" B/L, Rear air locker
Shrockworks bar & sliders, Full skid plates
4.24:1 t-case
 WAZUKS member - visit http://www.wazuks.com
*

Offline gv

  • 1
  • 0
Re: Need help with a part name
« Reply #3 on: February 27, 2008, 03:16:54 PM »
Is it a rear control arm?
Logged
*

Offline crikeymike

  • 713
  • 0
  • Gender: Male
  • Local to Western Washington?? Visit WAZUKS.com
    • http://www.wazuks.com
Re: Need help with a part name
« Reply #4 on: February 27, 2008, 04:22:28 PM »
Kind of, but not really.

The rear control arms are the 2 lower arms from the frame to the axle.

I guess "upper control arm could work", but it's really the Upper a-arm or Upper v-link.
Logged
1993 4-door Sidekick
3" hybrid Calmini/OME lift, 2" B/L, Rear air locker
Shrockworks bar & sliders, Full skid plates
4.24:1 t-case
 WAZUKS member - visit http://www.wazuks.com
*

Offline museboy07

  • 641
  • 0
  • Gender: Male
Re: Need help with a part name
« Reply #5 on: February 27, 2008, 08:04:03 PM »
i call it the rear upper 3rd link
Logged
1994 Tracker, 2in Ironman springs w/ 1in spacers on top, soon to have custom diff drop brackets, 31x10.5-15 All Tarrains, Pro Comp long travel shocks, KYB performance struts, strut mount flip w/2in extensions, 3in rear a-arm spacer, ...DD
*

Offline Yote

  • 34
  • 0
  • Gender: Male
Re: Need help with a part name
« Reply #6 on: February 27, 2008, 09:56:00 PM »
Well are the bushings the same for the rear control arms as the upper a-arm?
Logged
*

Offline Yote

  • 34
  • 0
  • Gender: Male
Re: Need help with a part name
« Reply #7 on: February 27, 2008, 10:25:34 PM »
On qaparts.com they have a listing for a "control arm rear upper driver" would that be the part I'm looking for???
Logged
*

Offline crikeymike

  • 713
  • 0
  • Gender: Male
  • Local to Western Washington?? Visit WAZUKS.com
    • http://www.wazuks.com
Re: Need help with a part name
« Reply #8 on: February 28, 2008, 10:48:33 AM »
yes
Logged
1993 4-door Sidekick
3" hybrid Calmini/OME lift, 2" B/L, Rear air locker
Shrockworks bar & sliders, Full skid plates
4.24:1 t-case
 WAZUKS member - visit http://www.wazuks.com
*

Offline crikeymike

  • 713
  • 0
  • Gender: Male
  • Local to Western Washington?? Visit WAZUKS.com
    • http://www.wazuks.com
Re: Need help with a part name
« Reply #9 on: February 28, 2008, 10:49:20 AM »
Quote from: Yote on February 27, 2008, 09:56:00 PM
Well are the bushings the same for the rear control arms as the upper a-arm?

No.  The lower control arms use lower control arm bushings.  The upper a-arm, upper 3rd link, upper v-link uses bushes made specifically for it.
Logged
1993 4-door Sidekick
3" hybrid Calmini/OME lift, 2" B/L, Rear air locker
Shrockworks bar & sliders, Full skid plates
4.24:1 t-case
 WAZUKS member - visit http://www.wazuks.com
*

Offline Yote

  • 34
  • 0
  • Gender: Male
Re: Need help with a part name
« Reply #10 on: February 28, 2008, 01:36:11 PM »
Thanks for the help guys
Logged
Pages: [1]   Go Up
« previous next »