Hello Guest

Spacer material

  • 8 Replies
  • 1839 Views

0 Members and 1 Guest are viewing this topic.

*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Spacer material
« on: September 09, 2004, 03:26:22 PM »
Hey everyone,

i am planning on doing the budget lift of heather and nates, i have bought the 3 inch square tubing i need and today i went down to a plastic whoel sale place and baught soem material for making the spring spacers, the material i got is exactly the same stuff that is used for spring spacers and they guy said it turns great on the lathe, and isnt too hard so it will be easy to bore the centers out to 2.25", does any one have exact measurments for the inner and outter dimentions?

my lug nuts require more torque then my engine makes ;)

*

Offline idaholwb

  • 772
  • 2
  • Gender: Male
  • And that's the way the metal crumpled!
Re: Spacer material
« Reply #1 on: September 09, 2004, 04:11:28 PM »
 As far as spring spacers are concerned, the best and cheapest way to deal with it, get spacers for a Jeep TJ, XJ, or ZJ, the front ones. The spacers are cheap, and you just get a whole saw and bore out  the centers. Much easier and cheaper than trying to build them from scratch. And they aren't made from plastic, they are polyurathane. Hope that helps.
97 Sport
265/70-16s
2" lift
2.0 swap
I know...Pretty boring... FOR NOW...

*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: Spacer material
« Reply #2 on: September 09, 2004, 04:32:26 PM »
yep, thats what i got i got soem polyurethane round stock that i am gonna  make on the lathe, i would buy jeep ones but they arnt comon here, i cant find any

my lug nuts require more torque then my engine makes ;)

*

Offline idaholwb

  • 772
  • 2
  • Gender: Male
  • And that's the way the metal crumpled!
Re: Spacer material
« Reply #3 on: September 09, 2004, 04:49:07 PM »
 Look into some of the online Jeep suppliers or try Rocky-road Outfitters. But, if you can make them, go for it. But, beware, machining that stuff will be messy. ;D
97 Sport
265/70-16s
2" lift
2.0 swap
I know...Pretty boring... FOR NOW...

*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: Spacer material
« Reply #4 on: September 09, 2004, 05:10:39 PM »
o ya haha it will eb messey i figured to order soem 2" spacers from RRO it would cost me well over 120 bucks and i payed 30 for this peice of poly so i think it will work

my lug nuts require more torque then my engine makes ;)

*

Offline jagular7

  • 1026
  • 0
  • Gender: Male
  • Jagular7
Re: Spacer material
« Reply #5 on: September 10, 2004, 02:44:38 PM »
I'd be interested in how you bought it. What kind of company, for example. I'm looking to using this as body lift spacers for the XL7. To add, do you have the MDS (material data sheet) on the product? I work with a couple of chemists and they specialize in adhesives. I'd cut these in half, lift the body of the XL7 high enough for the spacer, then put the 2 pieces together with adhesive. What is the hardness of the material?

Be interested in buyng and shipping to US?
Lenexa, KS

*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: Spacer material
« Reply #6 on: September 12, 2004, 04:50:22 PM »
i bauhgt it from a place called "industrial plastics and paints" they can get all kinds for poly materials they sell it by the foot

my lug nuts require more torque then my engine makes ;)

*

Offline jagular7

  • 1026
  • 0
  • Gender: Male
  • Jagular7
Re: Spacer material
« Reply #7 on: September 13, 2004, 01:34:54 AM »
Where is the location? Phone number? of Industrial Plastic and Paint?
Lenexa, KS

*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: Spacer material
« Reply #8 on: September 13, 2004, 03:05:02 AM »
it is in victoria bc canada, i can get you the phone number abit later, i am just out the door, after school i iwll find it

my lug nuts require more torque then my engine makes ;)