Hello Guest
« previous next »
Pages: [1]   Go Down

Replaceing the battery cable and etc

  • 4 Replies
  • 1418 Views

0 Members and 1 Guest are viewing this topic.

*

Offline SNJSamurai

  • 386
  • 0
  • Gender: Male
  • Always have fun in life never know when it can end
Replaceing the battery cable and etc
« on: January 09, 2009, 08:35:41 PM »
So when I remove my motor for the 1.6 swap i want to freshen up some wires and hoses.

hoses should be no big deal they look pretty good already but i want to replace the battery cables and maybe add some more groundings. Im not sure what gauge i should use, also and if i go with a little bigger gauge is it worth it
Logged
Bob
88' Samurai - 5" Lift, 3" DIY Body Lift, 31" Baja Claws, Rattle can flat green, Smittybilt Winch, Custom front bumper, 1.6 swap in progress
*

Offline RACER X

  • 383
  • 0
  • Gender: Male
  • zuki or die!
Re: Replaceing the battery cable and etc
« Reply #1 on: January 09, 2009, 08:52:49 PM »
my neg battery cable can slip on and off real easy whats the fix???
Logged
98 kick
*

Offline Carnage

  • 2453
  • 0
  • Gender: Male
  • If you only knew the POWER...
Re: Replaceing the battery cable and etc
« Reply #2 on: January 09, 2009, 10:08:17 PM »
Quote from: RACER X on January 09, 2009, 08:52:49 PM
my neg battery cable can slip on and off real easy whats the fix???


tighten it
Logged
*

Offline Drone637

  • *
  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: Replaceing the battery cable and etc
« Reply #3 on: January 10, 2009, 12:14:02 AM »
Or just replace it with a pair of ends from the auto parts store.  They usually run 99C apiece.  :)
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline SNJSamurai

  • 386
  • 0
  • Gender: Male
  • Always have fun in life never know when it can end
Re: Replaceing the battery cable and etc
« Reply #4 on: January 10, 2009, 01:49:02 PM »
im talking about the cable. the terminals im going to use a stereo type because of my winch and lights and other elec im putting in
Logged
Bob
88' Samurai - 5" Lift, 3" DIY Body Lift, 31" Baja Claws, Rattle can flat green, Smittybilt Winch, Custom front bumper, 1.6 swap in progress
Pages: [1]   Go Up
« previous next »