Hello Guest

1.6 install

  • 1 Replies
  • 934 Views

0 Members and 1 Guest are viewing this topic.

*

Offline celouden

  • 40
  • 0
  • I Love ZUKIWORLD!
1.6 install
« on: June 08, 2009, 07:12:37 PM »
Ive just about got my 1.6 built, and now trying to figure out the mounting.  Of course Petro is out of the adapter kits, so Ive been looking at others.  I have SPOA, but no body lift and dont want one to clear the hood.  Have weber card and air filter.

Question:

 WHICH adapter kit works so I dont have to have a body lift?  the motor i have did not include the mounts on the block or frame, so I have 1.3 engine mounts, and stock 1.3 frame mounts.  Do I need the block brackets for the 1.6? can I use the 1.3's? Does the TT kit have everything I need using the stock 1.3 brackets and mounts?....HELP...

*

Offline 1badzuk2

  • 89
  • 0
  • Gender: Male
    • my sammy more pics check it out
Re: 1.6 install
« Reply #1 on: June 09, 2009, 08:40:25 PM »
i just did a 8v and a 16v the 8v cleared the 16v dont my hood wont close im either goign to raise the hood a little or do a 1 inch body lift.  if you have any question let me know i just got done doing this sawy 2 days ago..
built sammy locked front an rear full roll cage 6 5 1 tc gears 96 16v motor and alot alot of mods