Hello Guest
« previous next »
Pages: [1]   Go Down

Valves 1.6 16V

  • 1 Replies
  • 1337 Views

0 Members and 1 Guest are viewing this topic.

*

Offline skookum

  • 3
  • 0
  • Gender: Male
  • No room for egoes
Valves 1.6 16V
« on: July 17, 2004, 02:37:43 PM »
trying to adjust valves on 1.6L 16V and can't get any thing on the exhaust.
I know I'm kinda dumb and clumbsy, but to dumb to adjust valves?
HELP :P
Logged
95 jx  stock
2 x 2.5 lift
29x11.5 super swamper ssl
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Valves 1.6 16V
« Reply #1 on: July 17, 2004, 05:31:42 PM »
just make sure the bumps are pointing to the otherside of the rocker contact surface on the stick (cam shaft)  for the upper 90 deg. rockers 180 deg off(away from the rockers) and pointing up for the lowers(away from the rocker)and yes some of the books are wrong on the firing order, number your cap to your rotor and wires with a felt pen, hope that helps!
« Last Edit: July 18, 2004, 09:58:29 AM by mrfuelish »
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
Pages: [1]   Go Up
« previous next »