Bummer I'm In illinois

I have a back seat complete and looking to sell.

I have a back seat complete and looking to sell.

Where you located at?

Chicago

 got a rear seat a while back, found the box that had the seat belt retractors in it and found the male parts didnt fit the female buckles. are they differant year to year ?

New to this board and am looking for the hardware for the rear seat of my kids "new to him" 88 Sammy.  We have a seat, in really good shape actually, but have absolutely zero hardware to mount it.  We've tried all over the web to see what the mounts even look like, but so far no luck.  I've gathered it needs a bracket of sorts that mounts to the rear of the seat, a strike plate on the rear that bolts to the bed, and some sort of hinges for the front?  Is there hardware so the seat does not "flip"?  or are they all "tilters"?

My kid wants to keep the Sammy as it was his grandmothers but he will have to get rid of it if he cant get the seat in the back so he can carpool this fall whan he starts college. (yes, two of the kids he will be sharing rides with are short enough)   

Any insight and/or info would be greatly appreciated. 

-Dave

as far as I know they all tilt. and as far as mounting stuff there is two hinges on the front of the seats that bolt to the floor and they should have rubber stoppers of sorts on the front of the hinges so when they fold forward they dont hit the bed and rub on the top of the seat and ruin the upholstery, second there is a latch on the rear of the seat that is hook like that then attaches to the triker plate that bolts to the floor. Lowrangeoffroad should have some used parts as well as, hawk suzuki, and trail tough. I get all my used parts from trail tough and all my new parts from lowrangeoffroad.

Thanks Airman.  Ive been to those sites plus half a dozen others.  Now that I know just what all the peices are, I can at least intelligently e-mail with a "wish lsit".

Thanks again!

-Dave

yup always email or call the vendors for parts you dont see on their sites, ive seen many that give up if they dont see the parts on the websites. Trailtough and lowrange get back to you super quick too.

hhmmm...  Took a closer look at the seat and it looks nothing like any of the tilting seats I have seen.  I know it's for this samurai as the front legs line up with mounts holes in the floorboard, but there is no place to bolt down the rear.  It definately looks like a "Rigid" mount, but some piece is missing and for the life of me, I just can not seem to identify it.

   

looks like a jeep seat to me, many people swap jeep rear seats in. if you cant make it safe and bolt the rear I would say sell it and find a samurai one in the local classifieds.

If you ever need a hard to find part, such as the hinges for the original seat, give Hawk Suzuki a call.  They can hook you up with just about anything or tell you where to find it.

airmanwilliams is right about that not being a Sammy seat.  Not even an SJ-410 one.

Definately good to know this isnt a Sammy seat.  We got teh car from the 2nd owner, who purchased it back in 91.  The material on this seats is the same as in the front seats, so I assumed.....

But...  At least that explains why nothing I was looking for matched up with what I was seeing.

Thanks both for the replies!