Hello Guest
« previous next »
Pages: [1]   Go Down

Bushwacker Wide Body fender kit

  • 7 Replies
  • 2762 Views

0 Members and 1 Guest are viewing this topic.

*

Offline yellow2000S/R

  • 152
  • 2
  • Gender: Male
Bushwacker Wide Body fender kit
« on: April 25, 2010, 12:58:46 PM »
SO... how many people have these? How much did they cost? Available anywhere anymore?

I was thinking about cutting the stock steel "flares" up the center of the arch and across the top front to back then stretching them wider and adding like 2" between the vertical and then whatever across the top to get the width to retain an "oem" look instead of bolted on flares. I was searching around and found this "widebody fender kit".



« Last Edit: April 25, 2010, 01:04:46 PM by yellow2000S/R »
Logged
*

Offline cj

  • 1276
  • 0
  • I drive a really big ATV
Re: Bushwacker Wide Body fender kit
« Reply #1 on: April 25, 2010, 03:49:47 PM »
There is a guy in the UK making them in fibreglass. They are around 300 UK pounds + shipping.
Logged
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: Bushwacker Wide Body fender kit
« Reply #2 on: April 25, 2010, 04:36:08 PM »
That's almost $600 USD! Yikes!~
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline yellow2000S/R

  • 152
  • 2
  • Gender: Male
Re: Bushwacker Wide Body fender kit
« Reply #3 on: April 25, 2010, 05:08:40 PM »
Quote from: bentparts on April 25, 2010, 04:36:08 PM
That's almost $600 USD! Yikes!~

Agreed. I'll stick to cutting my metal and adding some and rust preventing/priming/painting.
Logged
*

Offline LilRed

  • *
  • 930
  • 3
  • Gender: Female
    • Webshots Photopage
Re: Bushwacker Wide Body fender kit
« Reply #4 on: April 25, 2010, 06:05:43 PM »
The UK got some sweet options.
Logged
some clips from The Wishbone Ranch
http://www.youtube.com/user/KyLilRed
*

Offline bentparts

  • *
  • 4536
  • 60
  • Gender: Male
  • I'd rather be Blown AND Injected.
    • mikekallie's flickr photos
Re: Bushwacker Wide Body fender kit
« Reply #5 on: April 26, 2010, 03:52:43 AM »
 ;) No doubt, they get all the good stuff! Diesels too!
Logged
The usual stuff, and 2nd generation Air to liquid intercooled TURBOCHARGER
*

Offline Cuthulu

  • 384
  • 0
  • Gender: Male
  • I'd kill for a Nobel Peace Prize.
Re: Bushwacker Wide Body fender kit
« Reply #6 on: April 26, 2010, 04:58:34 AM »
I ever hit a small lottery I'll have a diesel dropped into my tracker.
Logged
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: Bushwacker Wide Body fender kit
« Reply #7 on: April 26, 2010, 07:08:10 AM »
Quote from: cj on April 25, 2010, 03:49:47 PM
There is a guy in the UK making them in fibreglass. They are around 300 UK pounds + shipping.

They have have been talked about and some prototypes made but they haven't gone into production yet.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
Pages: [1]   Go Up
« previous next »