Hello Guest
« previous next »
Pages: [1]   Go Down

Front wheel bearings

  • 6 Replies
  • 1568 Views

0 Members and 2 Guests are viewing this topic.

*

Offline Maiden Hell

  • 1650
  • 0
  • Gender: Male
  • MAIDEN HELL!
    • My Space
Front wheel bearings
« on: February 28, 2011, 06:47:23 PM »
Anyone know if these are serviceable (clean and re-grease them) or do you just replace the whole hub outright?
Logged
*

Offline trackinstile

  • 435
  • 0
  • Gender: Male
  • Too young to quit........Too old to change........
Re: Front wheel bearings
« Reply #1 on: March 01, 2011, 06:29:32 AM »
You know, I am wondering that myself....
Logged
A wise man once said, "Wherever you go...........There you are.............." 2000 Tracker 4 door with the 2.0 liter "Big Block". 5 speed 4WD  2001 XL-7 EX II
*

Online fordem

  • 4320
  • 167
  • Gender: Male
Re: Front wheel bearings
« Reply #2 on: March 01, 2011, 10:32:24 AM »
Looking at the parts manual - it's the hub assembly.
Logged
'98 SQ420 Grand Vitara
'05 JB420 Grand Vitara
'16 APK416 Vitara
'21 A6G415 Jimny
*

Offline beercheck

  • 1215
  • 0
  • Gender: Male
  • Go Cards!
    • trivia-nights.com
Re: Front wheel bearings
« Reply #3 on: March 02, 2011, 06:58:35 AM »
I replaced my whole hub, but it certainly looked rebuildable.  I'm not positive, but I think O'reilly's showed a bearing kit on their parts lookup.

edit:  "not available online", but it's listed
http://www.oreillyauto.com/site/c/search/Wheel+Bearings+&+Seals/C0055/C0337.oap?make=Suzuki&model=Xl-7&year=2002&vi=1388606
« Last Edit: March 02, 2011, 07:05:20 AM by beercheck »
Logged
'03 ZR2 2dr Tracker, '02 XL-7 drivetrain and electrcs
XL-7 front coils
1.5" rear coil spacers
Monroe 32316 shocks w/2" extenders
235/70-16 Bridgestone Destination A/Ts on stock XL-7 Alloys RRO Rock Rails (Presently removed, as they rusted to all hell; all the bolts were rusted to dust.  Real nice, RRO...) http://www.trivia-nights.com
*

Offline blacknight

  • 987
  • 1
  • Gender: Male
    • Gonzookin
Re: Front wheel bearings
« Reply #4 on: March 09, 2011, 01:24:21 PM »
there are two types. I know my 02 I needed to replace the whole spindle/hub so I swapped for an 04 where you can just replace the bearings

Geogre
Logged
*

Offline Maiden Hell

  • 1650
  • 0
  • Gender: Male
  • MAIDEN HELL!
    • My Space
Re: Front wheel bearings
« Reply #5 on: March 13, 2011, 06:02:56 PM »
Yeah it looks that way...ah well no big deal, I can get the parts cheap anyhow.
Logged
*

Offline ack

  • 1659
  • 34
  • Gender: Male
  • Professional askhole
    • Ack's FAQ
Re: Front wheel bearings
« Reply #6 on: March 13, 2011, 07:52:27 PM »
Gen I wheel bearings and races are replaceable.  You can buy a set of bearings and races at most Auto Parts stores.

Here is an article on the topic (searchable at Ack's FAQ...):

http://www.shropshire-suzuki.co.uk/forum/viewtopic.php?f=55&t=13294

I recommend that you buy these parts locally.  As mentioned at the end of the above thread, it is possible to get a "problem part" that is not machined properly. It's easier to take the part back to a local store for a refund than to deal with an out-of-town supplier...

I hope that ths helps! 
Logged
Ack

'88 Samurai, '88.5 Samurai TT, '11 Ford Transit Connect XLT
Ack's FAQ  http://www.acksfaq.com
Pages: [1]   Go Up
« previous next »