here's a short vid showing the newest project we built: a 2.2 Diesel powered LWB zuk.
Mazda R2 engine, 2.2 Diesel NA, came from the mazda bongo and mazda b2200 pickup.
-firewall was moved about 2 inches back
-flooring was modified to house new tranny
-3 new propeller shafts were fabricated, from tranny to t.case, then t.case to F&R diffs.
-t.case was moved to allow space for big tranny
-clutch from cable to hydraulic
-new fuel lines
-powersteering a necessity as engine bay would be too tight for old gearbox
-new radiator
any comments and queries shall be welcome!
I had this fear that the stock axles would break on the torque output the new engine would give, but surprisingly the gearing is just right, and the torque manageable. just don't release it too hard. 1st and 2nd gear is quite low-geared, even on 2H