Hello
Guest
Register
Login
1 Hour
1 Day
1 Week
1 Month
Forever
Menu
Home
Help
Search
Calendar
Login
Register
go
ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum
Technical Discussion - Beginner / Repair
Topic:
Driver side Brake light wont work
« previous
next »
Print
Pages: [
1
]
Go Down
Driver side Brake light wont work
5 Replies
1548 Views
0 Members and 1 Guest are viewing this topic.
travd123
2
0
Driver side Brake light wont work
«
on:
November 03, 2011, 10:01:44 AM »
Hi Im having an issue with these new stock replacement taillights. I bought 2 Yesterday from LR and hooked them up and all lights work except the driverside brake light. If anyone may no how i can resolve this problem i would appreciate the help.. thanks
Logged
travd123
2
0
Re: Driver side Brake light wont work
«
Reply #1 on:
November 03, 2011, 10:23:21 AM »
Whoops forgot this is for a 1986 samurai..
Logged
fordem
4326
170
Gender:
Re: Driver side Brake light wont work
«
Reply #2 on:
November 03, 2011, 11:29:12 AM »
If you're having a problem with a single brake light, the problem with either be the bulb, the bulb holder or the wiring - start by swapping the bulb from the other side across, and then proceed from there.
Logged
'98 SQ420 Grand Vitara
'05 JB420 Grand Vitara
'16 APK416 Vitara
'21 A6G415 Jimny
Drone637
8121
116
Gender:
Evil Cow
Re: Driver side Brake light wont work
«
Reply #3 on:
November 03, 2011, 04:06:39 PM »
Check your grounds as well. Most lighting issues can be traced back to bad ground wires on the Suzuki's.
Logged
96 Geo Tracker, x-SJ-410, x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
fordem
4326
170
Gender:
Re: Driver side Brake light wont work
«
Reply #4 on:
November 03, 2011, 07:23:31 PM »
I did consider a bad ground - but - the other lamps on the same side (tail, turn, etc.) will also use the same ground, so that should be intact.
Logged
'98 SQ420 Grand Vitara
'05 JB420 Grand Vitara
'16 APK416 Vitara
'21 A6G415 Jimny
P Funk
29
0
Gender:
Re: Driver side Brake light wont work
«
Reply #5 on:
November 06, 2011, 04:56:54 PM »
Look at where the ground wire connects to the bulb holder. If it gets corroded it will break the contact and stop working. It took me a month to find the same problem. Hope this helps.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »