Pages: 1 2 [3] Go Down

Advice needed for 88 sami project

31 Replies
3962 Views

0 Members and 1 Guest are viewing this topic.

tuxblacray

930
20
Gender:
Building a Bigger Better Brute Samurai.... B-}

Re: Advice needed for 88 sami project

« Reply #30 on: July 28, 2012, 03:30:04 AM »

Hi Bob... Sounds like your doing real well with the Zuk. I am not SPOA so I can't answer your lift question from experience. If it were me though and the sway bar gave me a problem I would remove it. If it didn't drive well on the road then I would install a Panhard Bar which does essentially the same thing.

Logged

I know the voices aren't real.... but they have some pretty kewl ideas!!! Tux..... ;-)
I get my Sammi parts here, and you can too... http://www.mikodaindustries.com/http://stores.ebay.com/sticksnstones4x4samuraiparts

bigbasshb

Re: Advice needed for 88 sami project

« Reply #31 on: July 29, 2012, 08:30:39 AM »

Thanks for the reply Tuxblacray. I ended up making my own extensions using some 1" square stock I had laying around.

Logged

88 Samurai (round vents)

Pages: 1 2 [3] Go Up

« previous next »