Hello Guest
« previous next »
Pages: [1]   Go Down

Need welding advice!

  • 10 Replies
  • 2300 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Trentski

  • 58
  • 0
  • Gender: Male
Need welding advice!
« on: April 16, 2004, 11:38:16 PM »
Need help to replace some missing sheet metal in the bed of my project sammy - the former owner was cutting her up to install a fuel cell and hydraulics:



Question - do I need an arc welder or a mig/tig. I know nothing about welding but have a friend who can and I need to know what type of welder to rent for the day I invite him over for beer, BBQ, and welding...

It's only the sheet metal that's cut and a few brackets (gas tank) nothing over 1/8"...

Thanks Guys..

Trento
Logged
-Trento
89 Sammi DD, custom bumpers, calmini S/R, 2" lift, 29" tires, CD, 3 tops, needs paint!
Next project(s): Safari rack, sliders, paint, 1.6 conversion (have the motor, needs machining)
*

Offline Agent Orange

  • 711
  • 1
  • Gender: Male
    • Trying to learn
Re: Need welding advice!
« Reply #1 on: April 17, 2004, 01:21:57 AM »
your going to want to use a mig welder for this type of work. use .023 70s-6 hard wire with a 75% argon 25% co2 blend. an arc welder would be too harsh for sheet metal, you'd end up burning holes.
Logged
*

Offline Mike71

  • 1449
  • 0
  • Gender: Male
Re: Need welding advice!
« Reply #2 on: April 17, 2004, 01:52:35 AM »
hydraulics  ;D u get ell loco low rider there dude u need to slam that turd and paint a  mural on the hood  :P
Logged
623hp kb cobra sold! 100hp kick new DD :P
*

Offline NY_SIDEKICKER

  • 2274
  • 0
  • Gender: Male
  • YOU WANNA RACE THE ZUKE !
    • OBSESSIVE BEHAVIOR !
Re: Need welding advice!
« Reply #3 on: April 17, 2004, 06:23:38 AM »
...QUOTE.....hydraulics   u get ell loco low rider there dude u need to slam that turd and paint a  mural on the hood..............   "Need help to replace some missing sheet metal in the bed of my project sammy - the former owner was cutting her up to install a fuel cell and hydraulics  "  ;D
« Last Edit: April 18, 2004, 04:28:21 AM by NY_SIDEKICKER »
Logged
*

Offline 87BlackSami

  • 191
  • 0
  • Gender: Male
  • http://www.quic kvwbug.4wdriver .com/
    • http://www.quickvwbug.4wdriver
Re: Need welding advice!
« Reply #4 on: April 17, 2004, 10:46:34 AM »
A hole like that I'd use a mig welder. :o  The Lincoln welder at Home Depot is a great deal for the doit yourselfer. You can buy that and weld anything you want on that Zuk. You'll have to get the argonC02 mix gas cylinder at a local welding supply shop though.
Logged
locked,5.8:1 Tcase, 5.12's, 35x12.5Xterrain's, 4" BDS L/O, Ford towers, 5-8" shackles w/reverse, tracbar, Yota P/S, diffs capped, skidplates, onboard air, fabbed bumpers & shafts, Herculined, airhorns
*

Offline Trentski

  • 58
  • 0
  • Gender: Male
Re: Need welding advice!
« Reply #5 on: April 17, 2004, 10:59:25 PM »
Thanks guys, I can rent a Mig welder for 40 bucks for the day from the local rental place.  I'll post the 'after' pics once the smoke clears.

-Trentski   8)
Logged
-Trento
89 Sammi DD, custom bumpers, calmini S/R, 2" lift, 29" tires, CD, 3 tops, needs paint!
Next project(s): Safari rack, sliders, paint, 1.6 conversion (have the motor, needs machining)
*

Offline Trentski

  • 58
  • 0
  • Gender: Male
Re: Need welding advice!
« Reply #6 on: April 17, 2004, 11:02:21 PM »
Hey NY - that's a kickin kick. I think the dud(e) who had mine prior was going the other direction - thinking bling bling low riding pimpmobile..  he had started to chromify everything in sight and had chrome bumpers and nerfs he wanted to sell me when I picked it up.

-TR 8)
Logged
-Trento
89 Sammi DD, custom bumpers, calmini S/R, 2" lift, 29" tires, CD, 3 tops, needs paint!
Next project(s): Safari rack, sliders, paint, 1.6 conversion (have the motor, needs machining)
*

Offline NY_SIDEKICKER

  • 2274
  • 0
  • Gender: Male
  • YOU WANNA RACE THE ZUKE !
    • OBSESSIVE BEHAVIOR !
Re: Need welding advice!
« Reply #7 on: April 18, 2004, 04:26:37 AM »
THANKS.......YEA I LIKE WILDS TAKE ON CHROME, IN HIS SIG. SLOT  ;D  CHROME IS JUST WORK THAT NEED NOT BE DONE. I HAVE NEVER LIKED CHROME, TOO MUCH WORK TO KEEP LOOKING GOOD  ;D
Logged
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: Need welding advice!
« Reply #8 on: April 18, 2004, 08:34:56 AM »
Do you have the parts that he cut out???
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline explosivo

  • 3157
  • 0
  • Gender: Male
  • I'm in the northern part of that one state.
    • omghi2u Gen. Discussion Forums
Re: Need welding advice!
« Reply #9 on: April 18, 2004, 12:17:13 PM »
Hrm... that reminds me that I still need to find a friend with a MIG welder so that I can replace a bunch of rusted out holes in the Tracker...
Logged
omghi2.us[/url]
"Its a ZUKI thing. Doing more with less than less with more." -- HotRod
*

Offline Cowtracker

  • 39
  • 0
  • Gender: Male
  • I love YaBB 1G - SP1!
Re: Need welding advice!
« Reply #10 on: April 18, 2004, 12:52:39 PM »
of course a mig welder would be best, but an econemy way of fixing the sheetmetal holes:

If you can get your replacment parts to fit well overlaping you couls use a pop rivets and undercoating or roofing tar to seal it up from the elements. um er Mud  ;D
« Last Edit: April 18, 2004, 12:53:43 PM by Cowtracker »
Logged
Guitars,zukes and hilbilly music!
Pages: [1]   Go Up
« previous next »