I had my sami t-case in  neutral to tow it home from paint shop and when I went to ingage it back into 2H, I pulled the handle back into 4H before moving it left to push forward into 2H, but when I pulled back, it moved a little to the left and felt like it popped out of it's notch in the shift rail. now it just moves side to side and I am stuck in neutral. anybody know any tricks or do I have to remove the shifter and align the shift rods with a screwdriver?

TIA

The spring pushing the leverball down is stronger than you think. The problem in the sheets gone and the lever is probably jammed to the bottom of the t-case. Best thing to do is pull the lever out. I never was able to get it in with a screwdriver, but I just used the shift lever after removing everything.


Matt- been there, done that

I think all Sami owners have this problem.  :-/ The old shifter sheet is probably gone. My Sami was in the shop for the lift and was stuck in neutral. A quick call to Petroworks and a day or two later it was here. We pulled the shifter out and there must have been 30 chunks of plastic in there Install takes all of 20 minutes. Easy to follow instructions. No problems.

Thanks guys, I will pull the lever out tomorrow morning and will probably find a plastic salad.