I found this ont the Apio site but...F*CK i don't understand anything in japanese!!!!

http://www.carmag.co.jp/apio/02PARTS/022ESCUD0/022TE0001/ESEX005.html

Fredo

lol i actually contacted them in japan to inquire about these parts. figuring in duty taxes and shipping it would cost almost $500 cdn. nah I'd rather try making my own somehow. neat part i wish someone here would make a set for sale.

I found this ont the Apio site but...F*CK i don't understand anything in japanese!!!!

http://www.carmag.co.jp/apio/02PARTS/022ESCUD0/022TE0001/ESEX005.html

Fredo

Try this  http://www.mezzofanti.org/translation/



ESCUDO pyro upper mount

Item turn: 1221-1

Price: (Left and right set) \30,000

Adaptation model: For TA/TD01 11

(End in the escudo of number of 2 use failure at the telephone please be sure to verify TA02 and the like) before the purchasing. Up to 0467-78-1182.

At the time of the lift rise by the coil spring it occurs, over camber of the front wheel (the letter of opposite ハ) state is revised. (Correction value 1 MARU 15") because of this, decreases understeer tendency with camber angle, travelling stability improves. It corresponds to the car which approximately 50mm it was lifted was raised.

Material: Strengthening aluminum/steel/stainless steel

The commodity is purchased
Copyright (C) 1997-2002 By APIO. (JAPAN) All rights reserved.

What do you wonna know?  That factory is right down the street from me.  They have some neat stuff, but outrageous prices  

Once the text is translated and then deciphered a bit more it is actually quite interesting, particularly the bit about understeer, I always assumed that was down to the spring rating (possibly contributes). If I'm guessing correctly their design allows for correction between 1 and 15 degees. This is considerably more than I've seen quoted for the eccentric bolt approach. I like the look of it but they've only done half a job they should have incorporated it into a 2" spacer

$500 cdn!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

but outrageous prices  

Fredo

Hey Somer!
Could you do me a favor and find out the current prices on part #'s
           3029-11, 3029-12, 3029-13 and 3029-14

And also if you can find out shipping to the USA zip code 26170
                    Thanks, Mike

Hey Somer!
Could you do me a favor and find out the current prices on part #'s
           3029-11, 3029-12, 3029-13 and 3029-14

And also if you can find out shipping to the USA zip code 26170
                    Thanks, Mike

I just checked their web site and for those parts they are about

3029-11=$310
3029-12=$720
3029-13=$660
3029-14=$750

Wow!! thats a lost of $$, especially since the dollar to yen rate  really sucks right now.  I couldn't find an email address on their site, but I can call then later if you still want to know if they can ship it.

Thanks "blacknight", cool translation link.

I just checked their web site and for those parts they are about

3029-11=$310
3029-12=$720
3029-13=$660
3029-14=$750

Wow!! thats a lost of $$, especially since the dollar to yen rate  really sucks right now.  I couldn't find an email address on their site, but I can call then later if you still want to know if they can ship it.

If you wouldn't mind finding the shipping cost that would be great. I would like to see how much I might have to pay if I decide to get it.

                      Thanks, Mike