Hello Guest
« previous next »
Pages: [1] 2   Go Down

Who here has made a snorkle?

  • 16 Replies
  • 4026 Views

0 Members and 1 Guest are viewing this topic.

*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Who here has made a snorkle?
« on: October 25, 2003, 12:46:23 PM »
I want to make one, where does yours come out and what did you use to make it?
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline wolf66

  • 193
  • 0
  • Gender: Male
Re: Who here has made a snorkle?
« Reply #1 on: October 25, 2003, 12:50:19 PM »
Well if you don't buy a ready made snorkle ($200+) then most seem to use black ABS plastic tubing in 3" or bigger, looks like black PVC at home depot.
As to where it comes out it depends what you drive, i think sammy's do it on the right side? and kicks on the left, X90's on the left. From the air box out the side of the front qtr panel and up the windshield support.
« Last Edit: October 25, 2003, 12:50:56 PM by wolf66 »
Logged
'96 Suzuki X90-4" lift-snorkle-30x9.5's on 8x15 wheels-5.12 gears-winch-added rear seat-DT header-PioneerMP3-CB-GPS-roof rack-rear mounted full size spare
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: Who here has made a snorkle?
« Reply #2 on: October 25, 2003, 01:11:24 PM »
I would say i have to have the best snorkle ever made.  It ant flashy or anything but you can't see it anyway.  I took the stock air rammer thing,  did a 180  with it, cut it in half,  plastic welded it togather, selded up all all the cracks and cut a whole in the fire wall and sealed it all up.
Logged
   
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: Who here has made a snorkle?
« Reply #3 on: October 25, 2003, 02:19:43 PM »
Can somebody post a pic or some info on what the box on top of the snorkle looks like please.  
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline HotRod

  • *
  • 4334
  • 2
  • Gender: Male
  • 95 Tracker
    • cardomain.
Re: Who here has made a snorkle?
« Reply #4 on: October 25, 2003, 04:09:26 PM »
 ARB has one and its pretty nice but runs around $230. I have one but just hate to cut up my fender (drill a 3.5inch) and miss my mark.
Logged
95 2dr Geo Tracker with Calmini 6"inch combo lift, 32'inch BFGs M/Tlocked and loaded--D.D is my 06 Racy RED Aerio SX AWD
*

jdraper

Re: Who here has made a snorkle?
« Reply #5 on: October 26, 2003, 12:00:53 AM »
I built one for a '96 Explorer out of 2.5" I.D. (3" O.D.) Electrical PVC from Lowes.  Total cost without the head was about $40.  Head alone costs $60 or so.  Here's some pix of the snorkel/head.  The head is an ARB Safari Snorkel head ordered from JD's offroad.  I think the part # for just the head is ARB 000135000.





« Last Edit: October 26, 2003, 11:16:30 AM by jdraper »
Logged
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: Who here has made a snorkle?
« Reply #6 on: October 26, 2003, 12:20:40 AM »
is it just me or do those pics not work?
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: Who here has made a snorkle?
« Reply #7 on: October 26, 2003, 01:21:43 AM »
The pics no work, I copied and pasted the
link into a blowser, it's a passworded site.

host your pics on a free site so we can all see them. ;)
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

jdraper

Re: Who here has made a snorkle?
« Reply #8 on: October 26, 2003, 07:18:06 AM »
OK, I re-did the pix above....Can you see them now? (I feel like a verizon commercial!  ::) )
« Last Edit: October 26, 2003, 07:19:33 AM by jdraper »
Logged
*

jdraper

Re: Who here has made a snorkle?
« Reply #9 on: October 26, 2003, 07:36:45 AM »
FYI, ARB offers two sizes of Snorkel heads.  I believe there is a 3" and a 4".  For the 4 bangers, a 3" would be sufficient.  The one above is a 3" since the stock box fits the 2.5" I.D of the pipe perfectly.  Delivery of just the head can be a problem.  It took almost 2 months to get the one we ordered because no one had just the head in stock, so it had to be shipped from Australia.
« Last Edit: October 26, 2003, 11:19:49 AM by jdraper »
Logged
*

Offline trackinstile

  • 435
  • 0
  • Gender: Male
  • Too young to quit........Too old to change........
Re: Who here has made a snorkle?
« Reply #10 on: October 26, 2003, 10:24:59 AM »
Nice work, I especially like your attention to detail, it looks like you really took your time making the hole in the fender for  the snorkel.  That alone would have driven me nuts, I'd probablu go full bull moose nuts with a sawzall and before I'd know it I'd be one less fender on the Tracker ;D  Nice Job,   Dave.     Ps, can you show an interior view too?
Logged
A wise man once said, "Wherever you go...........There you are.............." 2000 Tracker 4 door with the 2.0 liter "Big Block". 5 speed 4WD  2001 XL-7 EX II
*

jdraper

Re: Who here has made a snorkle?
« Reply #11 on: October 26, 2003, 11:14:42 AM »
Quote
Nice work, I especially like your attention to detail, it looks like you really took your time making the hole in the fender for  the snorkel.  That alone would have driven me nuts, I'd probablu go full bull moose nuts with a sawzall and before I'd know it I'd be one less fender on the Tracker ;D  Nice Job,   Dave.     Ps, can you show an interior view too?


Thanks,  I bordered the hole with a piece of door edge molding from Wal-Mart to make it look better.  I used a jigsaw to do the cutout .  A little more precise than Dr. Sawzall.  8)  When you say an interior view, do you mean without the fender, or from inside the truck??  I have shots I took with the fender off, but none from inside the truck.  I also don't have the truck any longer, I returned it to the owner.  I was just modifying it for her.

Here are some of the install pix I have.  Wood blocks were used to get the right positioning before I cut aluminum blocks to fit.



Logged
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: Who here has made a snorkle?
« Reply #12 on: October 26, 2003, 01:14:59 PM »
Ok, so what does the box look like on the inside?  Is it just a scoop or does it have somthing to keep rain out of it on the highway?
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline trackinstile

  • 435
  • 0
  • Gender: Male
  • Too young to quit........Too old to change........
Re: Who here has made a snorkle?
« Reply #13 on: October 26, 2003, 01:20:18 PM »
Sorry, I meant under the hood shots, but the one's you posted are even better, thanks for the info ;D  Dave
Logged
A wise man once said, "Wherever you go...........There you are.............." 2000 Tracker 4 door with the 2.0 liter "Big Block". 5 speed 4WD  2001 XL-7 EX II
*

jdraper

Re: Who here has made a snorkle?
« Reply #14 on: October 26, 2003, 10:18:57 PM »
Quote
Ok, so what does the box look like on the inside?  Is it just a scoop or does it have somthing to keep rain out of it on the highway?


The way it's designed, the rain is channeled to the outside and the water runs down the outside of the pipe.  There are slots cut for that purpose.  Easier way to keep the rain out is to turn the head around backwards when you're driving in the rain.  It's just held on with a large hose clamp.
Logged
Pages: [1] 2   Go Up
« previous next »