Hey guys here is the situation

I got a 2001 Grand vitra and im putting the rims off my sidekick on to the gv but i need to get a 1" wheel spacer from ROCKY-ROAD i put them one temp and everything clears.

Here is the problem the center of the wheel spacer is too small by like 2-3mm i guess to center the wheel on the truck. Now the Sidekick has no lip and when u put the spacer on it it i uses the Lug nuts to center the spacer and wheel.

Im thinking of taking a grinder and just grinding the lip out of it and let the lug nuts center the spacer on the truck anyone im sooo stuck.

JOSH

I can't see any problems with grinding it though a quick spin in a lathe would be preferable.

Thats how they center on the samurai (lug nuts)just make sure things are real clean and use blue loc-tight or green and torque to at least 55 lbs and let it set up for a day or more.

ok guys yeah i would rather lathe them but i go the truck all apart and i need the truck tomorrow so it should be good just grind them so they fit then the lugs nuts should center them

Any more sujestions

Quit talking about it and gether done.