Hello Guest
« previous next »
Pages: [1]   Go Down

Grinding on my XL-7 case

  • 3 Replies
  • 1855 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Zukipilot

  • 7160
  • 25
  • Gender: Male
  • stretch the limits of reality!!!
Grinding on my XL-7 case
« on: September 02, 2003, 12:59:20 AM »
Does anyone know if it will hurt to grind one of the ridges off of my XL-7 steel casing? I finally got my Anvil installed this weekend but one of the ridges is hitting the cross member. I will need to grind 1.5" of the ridge down flush with the main casing.
Zig
Logged
Zukipilot
'92 Liberty Overland Sidekick
*

Offline Yankee Tim

  • 431
  • 0
  • Who says a GV is a grocery getter?
    • Yankee Off-Road
Re: Grinding on my XL-7 case
« Reply #1 on: September 02, 2003, 01:21:00 AM »
I think it should be fine.
Logged
Yankee Tim
*

Offline ebewley

  • 6566
  • 66
  • Gender: Male
  • ZUKIWORLD Online, Editor
    • ZUKIWORLD online
Re: Grinding on my XL-7 case
« Reply #2 on: September 02, 2003, 02:01:58 AM »
Quote
Does anyone know if it will hurt to grind one of the ridges off of my XL-7 steel casing? I finally got my Anvil installed this weekend but one of the ridges is hitting the cross member. I will need to grind 1.5" of the ridge down flush with the main casing.
Zig


Wha-wha-wha-what!? Are you serious? I'm perplexed man, has your crossmember been bent or somethin? I think that I'd actually move the crossmember instead. Remember, you're putting in that 3rd member because you wanted strength due to breakage.

Signed, Cornfuzed...
Logged
Eric L. Bewley                               
Editor, ZUKIWORLD Online                   

Suzuki 4x4 Owners Association - Please Join  The ZUKIWORLD ORDER Today!
About ZUKIWORLD Online: We are an enthusiast web site dedicated to the promotion of the Suzuki Automobile as the best and most capable vehicle on the planet. We offer product reviews, Tech tips, DIY, Travel and Adventure, Forum, Technical information, Life Style, and so much more!
*

Offline Zukipilot

  • 7160
  • 25
  • Gender: Male
  • stretch the limits of reality!!!
Re: Grinding on my XL-7 case
« Reply #3 on: September 02, 2003, 04:46:01 AM »
Dont be to confused :P I was thinking going from all aluminum to steel and cast, that a little grindage wouldnt hurt ??? And YES, I have a bent cross-member on my kick and mentally too :P

I tried the beat the hell out of the cross-member with a BFH, but that did not work. I also thought of  notching the cross-member, but that did not seem to smart :o
Zig
Logged
Zukipilot
'92 Liberty Overland Sidekick
Pages: [1]   Go Up
« previous next »