Hello Guest
« previous next »
Pages: [1]   Go Down

1.3 intake and exhaust on 1.6 block and head

  • 5 Replies
  • 1576 Views

0 Members and 1 Guest are viewing this topic.

*

Offline mudbug

  • 36
  • 0
  • Gender: Male
  • Mudbugging
1.3 intake and exhaust on 1.6 block and head
« on: April 08, 2005, 01:36:50 PM »
I have a 94 1.6 engine that I want to put in my Sammy.  I was wondering if in could just pull the 1.6 block and head and reuse the 1.3 intake and exhaust manifolds with the 1.3 ECU?  Has anybody done this before?  I figured that it would be like having the 1.3 bored over if the manifolds fit.
Logged
Jeeps are for people who can't handle a Suzuki!!!
*

Offline Mikerpm4x4

  • 2875
  • 12
  • Gender: Male
  • Redline... all the time!
    • www.rpm4x4.com
Re: 1.3 intake and exhaust on 1.6 block and head
« Reply #1 on: April 08, 2005, 03:08:46 PM »
It works if the 1.3 is fuel injected.

mike
Logged
If your not living life to the fullest then your not living at all.

You wont really know if your wrong till your upsidedown
*

Offline domba420

  • 38
  • 0
  • I love YaBB 1G - SP1!
Re: 1.3 intake and exhaust on 1.6 block and head
« Reply #2 on: April 08, 2005, 06:14:53 PM »
ive heard from a lot of people that use the 1.3 intake even if its carbureted or injected, as long as it is an 8v 1.6, not the 16v
Logged
*

Offline Bigzook

  • *
  • 2206
  • 13
  • Gender: Male
  • Current owner of the famous Audi Kick
    • Donkey Worx Galleries
Re: 1.3 intake and exhaust on 1.6 block and head
« Reply #3 on: April 09, 2005, 02:58:06 AM »
Ive even seen a 16 vlave that a guy made a mainfold for so he could put a carb. on it. I think I remember reading he diddnt want to fuss with the efi.
Logged
*

Offline takai

  • 907
  • 0
  • Gender: Male
  • Yes, I drove that here. And No, it's not done!
Re: 1.3 intake and exhaust on 1.6 block and head
« Reply #4 on: April 10, 2005, 08:03:16 AM »
Hawk puts the Sammi 1.3 head on the 1.6 block for their conversion kit so you can utilize all you old equipment.
Logged
87 Sammi "Sir Tweak " Rockcrawler 4:1, Mighty Kong , 1.6 16V, Centerforce II, 2" Exhaust, Esteem seats. - Long gone
97 Tracker "Jezebel"  Bone Stock DD

'Cause, I am to misbehave.
*

Offline mudbug

  • 36
  • 0
  • Gender: Male
  • Mudbugging
Re: 1.3 intake and exhaust on 1.6 block and head
« Reply #5 on: April 10, 2005, 03:04:06 PM »
Sounds like I am going to be able to put a little more power into my rig now that I can put the 1.6 in it.
Logged
Jeeps are for people who can't handle a Suzuki!!!
Pages: [1]   Go Up
« previous next »