I got a little problem

 - the 1.6 8V is a 91 or 92 (electric plug to the dist)
 - the harness & distributor is from an 89 or 90 (vacum to distributor)

 Can I splice or "T" one of the other vac lines as I think it will make this wiring nightmare just a little easier

The harness, ECM, dist, and all the extras are from the 89-90. So far everything else seems to be plug and play.

Signed, HELP PLEASE!
Steve

     I might be wrong but I think you are going to need to switch to the 89-90 distributor to get everything within the harness and ecm to co-operate.
     The ECU is very different from 89-90 to the 91-93 and the distributor is a non swap for normal installs.

Zag