I decided to trim the bumpers rather than cut into the bumper support. I will put a skid plate in the front and perhaps fab up a pre-runner bar. As you can tel the rear bumper only needs minor trimming to fit over the bumper. I decided to trim the bumpers and keep the stock mounting points for everything. I will also fab up a rear skid plat to cover the gas tank.

Sounds like it didn't take much work at all 

I was pretty easy, and like I said the bumpers are mounted in stock points, I just trimmed the covers a little to make them fit. This was an easy lift, I think I spent more time on the suspension lift than on the body lift. I'll post pics up of the combined lift in the next few days.

Hey how did u find the ride with the lift was it more tippy???

I didn't notice too much difference. I did put on 1.5" spacers on the wheels so I have a wider track to compensate for the added lift.

1.5" spacers on the wheels what company?

From here, you can get up to 2" for about $200

http://www.ezaccessory.com/Wheel_Adapters_s/25.htm

Man that gas tank hangs low.  Makes you really wish you could do the gas tank lift

That's why I went with the suspension lift.

Man those prices are good Im looking at a set of 2" ones or maybe 1.5".

Yeah, the prices are very good and the spacers are nice quality as well. I was going to go with the 2" ones but though it might be just a tad to wide so I went with a 1.5" instead. I'll post pics up once I have my 265/75/16's on.

Coo i have the 1" spidertrax ones now and im gonna order up the 1.5" for the rear.

have u noticed and weird tire wear??

What do you mean by weird tire wear?

Im not sure if its just me but the inside of my tires are worn. Almost like alignment problem. im gonna rotate them and see.

Josh

Hmm, maybe you over did it on grinding out the strut correction hole and now you have a camber problem?

Nope camber is perfect had it all aligned. I think the tires were scalled from the other truck

If they are used tires than yeah, it could be the previous vehice. On my montero I got some used 32's and the suv would vibrate between 45 and 60 mph becuase of the tires and the way they wore ont he previous vehicle.