Hello Guest
« previous next »
Pages: 1 [2] 3   Go Down

Roll cage

  • 37 Replies
  • 7224 Views

0 Members and 2 Guests are viewing this topic.

*

Offline mesjr2004

  • 422
  • 0
  • Gender: Male
Re: Roll cage
« Reply #15 on: February 03, 2005, 11:53:12 AM »
i work in a sheetmetal shop and my price is $1.02 a foot on 1 1/5 x120 wall tubing,and i cant believe you guys are paying that much for steel :o

tracker8wr their was a thread about a month agow allong thies lines some cool cages in that thread
Logged
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: Roll cage
« Reply #16 on: February 03, 2005, 12:36:06 PM »
IF YOU CAN GAIN ACCESS TO A BENDER DO WHAT I DID
MAKE YOUR CAGE EXTERNAL IF IT'S DONE RIGHT IT LOOKS PRETTY COOL. BESIDES IT CUTS DOWN ON BODY DAMAGE I KNOW CHICKS DIG BODY DAMAGE. SO FOR WE'VE BUILT FIVE OF THEM

                                                   ROSS
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline zukizzy

  • 123
  • 0
  • Gender: Male
  • Give it a bump, see what happens!
Re: Roll cage
« Reply #17 on: February 03, 2005, 11:30:37 PM »
Quote
i work in a sheetmetal shop and my price is $1.02 a foot on 1 1/5 x120 wall tubing,and i cant believe you guys are paying that much for steel :o

tracker8wr their was a thread about a month agow allong thies lines some cool cages in that thread


I'll take 1000 ft pm me for my address ;D

Wayne
Logged
Clearly a road
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: Roll cage
« Reply #18 on: February 04, 2005, 05:43:10 AM »
Zig,  why don't you post some pics of your cage?

stu
Logged
   
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: Roll cage
« Reply #19 on: February 04, 2005, 05:50:38 AM »
got one of mike


stu
Logged
   
*

Offline Mikerpm4x4

  • 2875
  • 12
  • Gender: Male
  • Redline... all the time!
    • www.rpm4x4.com
Re: Roll cage
« Reply #20 on: February 04, 2005, 01:26:34 PM »
I know a front cage would be Idea but several of us in our club have opted for just a sturdy rear cage. At least I wont get knocked unconcious by the cage when I tip over, and The top wont go flat. If I were shorter I would go with a full cage. In the future I may figure out a way to get a full cage in there... ::) ;D

Mike
Logged
If your not living life to the fullest then your not living at all.

You wont really know if your wrong till your upsidedown
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: Roll cage
« Reply #21 on: February 04, 2005, 01:38:00 PM »
GO TO READER RIDES LOOK AT THE BLUE SAMI WITH FLAMES THAT WE STRETCHED 16 INCHES THATS ONE OF OUR CAGES. PLENTY OF HEADROOM

                                      ROSS
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline HotRod

  • *
  • 4334
  • 2
  • Gender: Male
  • 95 Tracker
    • cardomain.
Re: Roll cage
« Reply #22 on: February 04, 2005, 05:19:23 PM »
I'm 6'3" (last time I check, I could be shrinking in my old age) and have the full Calmini rollcage in my Tracker with plenty of headroom.
I have the cage padded and just rest my head on it, this way I don't bounce my head off of it ;)
« Last Edit: February 04, 2005, 05:19:59 PM by trickker »
Logged
95 2dr Geo Tracker with Calmini 6"inch combo lift, 32'inch BFGs M/Tlocked and loaded--D.D is my 06 Racy RED Aerio SX AWD
*

Offline mesjr2004

  • 422
  • 0
  • Gender: Male
Re: Roll cage
« Reply #23 on: February 04, 2005, 05:28:16 PM »
getting old sucks! i was 6'2'' at 18yrs old now im just  over 6'
Logged
*

Offline HotRod

  • *
  • 4334
  • 2
  • Gender: Male
  • 95 Tracker
    • cardomain.
Re: Roll cage
« Reply #24 on: February 04, 2005, 05:40:05 PM »
I wished I redid my main hoop to be like Mikes. Thats the right way to do it.
Tall enough to support the roof b-4 crushing it, not after.

I hope I'm not getting shorter. I do carry alot of heavy stuff all day and that will do it for ya. ;D
Logged
95 2dr Geo Tracker with Calmini 6"inch combo lift, 32'inch BFGs M/Tlocked and loaded--D.D is my 06 Racy RED Aerio SX AWD
*

Offline mesjr2004

  • 422
  • 0
  • Gender: Male
Re: Roll cage
« Reply #25 on: February 04, 2005, 05:47:59 PM »
ya that is a good idea .but it would be harder to tie the front loop to it.
that thing does look stout
Logged
*

Offline tracker8wr

  • 568
  • 0
  • Gender: Male
  • THE BIGGER THE BETTER
    • my home page
Re: Roll cage
« Reply #26 on: February 05, 2005, 09:17:37 AM »
thanks guys am have a hydrolic bender here so i am going to make my own just in the rear however i am planning to run a bar to the front windshield upper suport and weld it in ther i will have to relocate my rearview mirror to the windsheild. i am thinking of tying in tto the side of the b-pilar. my main consern is my 4 year old co-pilot i don't want her to get hurt. what size and type of tubing did u use MIKE.
Logged
4 1/2 body
Coil spacers
cheap but effective
31" LTB Swampers
http://www.geocities.com/race8thwonder01/ http://www.cardomain.com/memberpage/769479
*

Offline Mikerpm4x4

  • 2875
  • 12
  • Gender: Male
  • Redline... all the time!
    • www.rpm4x4.com
Re: Roll cage
« Reply #27 on: February 05, 2005, 12:12:22 PM »
Quote
thanks guys am have a hydrolic bender here so i am going to make my own just in the rear however i am planning to run a bar to the front windshield upper suport and weld it in ther i will have to relocate my rearview mirror to the windsheild. i am thinking of tying in tto the side of the b-pilar. my main consern is my 4 year old co-pilot i don't want her to get hurt. what size and type of tubing did u use MIKE.

Its what ever is standard for circle track racing. :-/ Sorry Im not much help beyond that. I had some help getting  the pipe done up by some circle track guys.

Mike
Logged
If your not living life to the fullest then your not living at all.

You wont really know if your wrong till your upsidedown
*

Offline Zukipilot

  • 7160
  • 25
  • Gender: Male
  • stretch the limits of reality!!!
Re: Roll cage
« Reply #28 on: February 05, 2005, 12:24:16 PM »
Quote
Zig,  why don't you post some pics of your cage?

stu

I will monday. My cage pics are on my computer at work.

They are on the uploader buy I cant brouse it with this slow ass dial up.
Zig
« Last Edit: February 05, 2005, 12:25:16 PM by Zukipilot »
Logged
Zukipilot
'92 Liberty Overland Sidekick
*

Offline tracker8wr

  • 568
  • 0
  • Gender: Male
  • THE BIGGER THE BETTER
    • my home page
Re: Roll cage
« Reply #29 on: February 09, 2005, 06:22:17 AM »
zukipiolit i'm still waiting for those pics. this weekend is build time i 5 friends comming to help. not just on the roll cage.
Logged
4 1/2 body
Coil spacers
cheap but effective
31" LTB Swampers
http://www.geocities.com/race8thwonder01/ http://www.cardomain.com/memberpage/769479
Pages: 1 [2] 3   Go Up
« previous next »