Hello Guest
« previous next »
Pages: [1] 2 3   Go Down

RPMs

  • 30 Replies
  • 5060 Views

0 Members and 1 Guest are viewing this topic.

*

Offline 3wheelerdude

  • 70
  • 0
  • Gender: Male
RPMs
« on: January 13, 2005, 01:45:34 PM »
What should the RPMs indicate when going 100km/h (or 60 m/h) in fifth gear, on a 1.6 sidekick. (no mods)
Logged
2000 Mustang
1996 Sidekick
1989 Tempo
1987 F150
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: RPMs
« Reply #1 on: January 13, 2005, 01:57:08 PM »
check your tach, its beside the speedo in the gauges, it'll tell you
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: RPMs
« Reply #2 on: January 13, 2005, 02:00:26 PM »
about 3500 rpm's.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline 3wheelerdude

  • 70
  • 0
  • Gender: Male
Re: RPMs
« Reply #3 on: January 13, 2005, 02:00:28 PM »
I know, but I find mine is pretty high and I just got the truck so i would like to make sure its normal. Mine reads about 3500. How ddoes that sound??
Logged
2000 Mustang
1996 Sidekick
1989 Tempo
1987 F150
*

Offline 3wheelerdude

  • 70
  • 0
  • Gender: Male
Re: RPMs
« Reply #4 on: January 13, 2005, 02:01:56 PM »
Quote
about 3500 rpm's.

Thank you!!!!!!! I shall forever thank you for reassuring me. Someone on another forum told me it should be 2600........thats why i was kinda freaking out.
Logged
2000 Mustang
1996 Sidekick
1989 Tempo
1987 F150
*

Offline W7ACT

  • 30
  • 0
  • Gender: Male
Re: RPMs
« Reply #5 on: January 13, 2005, 02:09:01 PM »
There's to many variables to give you a correct answer to your question to change anyone of the variables  can change the answer to the question. What gears are you running in the tranny, in the rear end, what size tires are you running.   You change each,  any one or all of these factors and you can get a differant answer.

A good case in point an number of years ago I drove for a company in Eastern Washington we had two trucks they were Identical in very respect the only difference was the Serial Number and that was by one number they came off the assembly line one behind the other and were delivered to the same company one would out run the other every time it was given.
Logged
*

Offline 3wheelerdude

  • 70
  • 0
  • Gender: Male
Re: RPMs
« Reply #6 on: January 13, 2005, 02:52:37 PM »
alright, sorry if my question was a bit LARGE, but it still feels good to know that im not the only one who runs high RPMs at 100km/h.
Logged
2000 Mustang
1996 Sidekick
1989 Tempo
1987 F150
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: RPMs
« Reply #7 on: January 13, 2005, 03:10:41 PM »
With 5.83 gears and 33" tires
I'm pulling about 4300-4400
RPM at 70 MPH (about 110 Kmh)
« Last Edit: January 13, 2005, 03:11:57 PM by wildgoody »
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: RPMs
« Reply #8 on: January 13, 2005, 03:35:34 PM »
when i do my drive on the highway everyweekend, i do about 100 kmh |removethispart|@ around 3400 rpm
Logged

my lug nuts require more torque then my engine makes ;)
*

Offline 1bigtracker

  • 3409
  • 1
  • Gender: Male
  • F*** trail rated, try trail tested
Re: RPMs
« Reply #9 on: January 13, 2005, 10:29:17 PM »
don't be afraid to take a 1.6 to to 6000RPM+.   very strong engine.  i have over heated mine many times and it still won't blow.

stu
Logged
   
*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: RPMs
« Reply #10 on: January 14, 2005, 02:24:03 AM »
Quote
don't be afraid to take a 1.6 to to 6000RPM+.   very strong engine.  i have over heated mine many times and it still won't blow.

stu


6 grand? thats pretty high, anyone else do this?
Logged

my lug nuts require more torque then my engine makes ;)
*

Offline Natebert

  • 1098
  • 0
  • Gender: Male
Re: RPMs
« Reply #11 on: January 14, 2005, 02:28:05 AM »
Quote


6 grand? thats pretty high, anyone else do this?



We hit 5500 every time we take it up to 75mph.
We've run this way for hours at a time.

I've seen it hit 6500 no problems.

~Nate
« Last Edit: January 14, 2005, 02:28:40 AM by natebert »
Logged
*

Offline 92Sidekick4x4

  • 1456
  • 0
  • Gender: Male
  • Spencer Atkinson, 92Sidekick4x4
Re: RPMs
« Reply #12 on: January 14, 2005, 08:10:46 AM »
hm, thats good to know, thanks! :)
Logged

my lug nuts require more torque then my engine makes ;)
*

Offline mrfuelish

  • *
  • 2862
  • 13
  • Gender: Male
  • you must have a perception problem.
Re: RPMs
« Reply #13 on: January 14, 2005, 09:14:20 AM »
You might be talking about two diffrent engines also, the 16 valve and the eight valve are a little bit diffrent on the top ends and the bottom ends. I think my 16 valve shuts down at 6500 by the ecm.
Logged
1987,1988,1988,1990 samurai's,  1953 m38a1,  1996 x-90,blue.1996 x-90 red.1994 2 door tracker.   only Dead Fish go with the flow.                No Hairy Nosed Wombats were ran over on the trail today.       My ZUK is Xenophobic.
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: RPMs
« Reply #14 on: January 14, 2005, 03:58:53 PM »
I hit 6000 in first and second, but by
the time I'm to 6000 in third I'm going
over 100 MPH
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
Pages: [1] 2 3   Go Up
« previous next »