Hello Guest
« previous next »
Pages: [1]   Go Down

16 valve sammy swap.

  • 4 Replies
  • 1387 Views

0 Members and 1 Guest are viewing this topic.

*

nerd

16 valve sammy swap.
« on: October 11, 2007, 04:14:19 AM »
hi i just joined this forum and recently bought a 1988 tin top samurai with a bad engine...ive found a 4 door tracker in a junk yard and i want the engine out of it...what all should i take from the 4 door to complete the swap?  besides the engine haha
Logged
*

Offline SnoFalls

  • 1358
  • 3
  • Gender: Male
Re: 16 valve sammy swap.
« Reply #1 on: October 11, 2007, 07:41:05 AM »
wiring harness,
ECM (if you wanna run EFI)
Power Steering pump and box (if it has it)
Logged
I don't suffer from insanity, I enjoy it.

Buy-it, Build-it, Beat-it, Part-it
*

nerd

Re: 16 valve sammy swap.
« Reply #2 on: October 11, 2007, 08:11:27 AM »
do i need the power steering stuff? im not planning on making the samurai have power steering
Logged
*

Offline Rhinoman

  • 4502
  • 36
  • Gender: Male
  • Bend it, Break it, Fix it
    • Rhinoman
Re: 16 valve sammy swap.
« Reply #3 on: October 11, 2007, 10:46:35 AM »
You don't need the power steering stuff but its nice to have  ;D. Grab the speedo as well if you're fitting EFI because you'll need the vehicle Speed Sensor which is screwed on the back of the speedo head. Make sure you get the ECU on its bracket with all the relays attached.
Logged
2000 Vitara 1.6, 3+3 Lift, 33"MTs, 5:83s, LWB brakes, Winch, Snorkel, Safari Rack
1986 SJ413K PickUp, 1.6L conversion.

OBD1 - Full diagnostics on a PC/Laptop: http://www.rhinopower.org
*

nerd

Re: 16 valve sammy swap.
« Reply #4 on: October 11, 2007, 12:01:48 PM »
awesome....thanks for all the input keep it comming
Logged
Pages: [1]   Go Up
« previous next »