Hello Guest

Toyota axles on my 02 tracker

  • 4 Replies
  • 2333 Views

0 Members and 1 Guest are viewing this topic.

*

Offline YellowZR2

  • 59
  • 0
  • Gender: Male
Toyota axles on my 02 tracker
« on: September 19, 2008, 12:00:51 PM »
I seen these on EBAY and was wondering if they could be used on my 02 tracker.
I'm assusming much much more would be needed but they could be a good start.

84 Toyota truck solid axles-EBAY

At $100 bucks and close enough to drive to easily it might be worth for me.
02 Tracker ZR2 2 door (mostly stock-BORING)
05 trailblazer LS stock and staying that way-it's our tow vehicle.

*

Offline Basher

  • 44
  • 0
  • Gender: Male
Re: Toyota axles on my 02 tracker
« Reply #1 on: September 19, 2008, 07:45:30 PM »
not sure on the tracker, i know guys run them on sammis, not sure how the t-case output sits on a tracker, on a sammi you need a passenger side pumkin in the front ,wich the toyotas have, the rear is also offset a little, some guys run the centered toyota pumkin and say it works fine... seems a little odd but hey whatever,also they are around 6-7 inches wider , great for alot of wheelin but maybe not what you want on the street
 and thats a really low price, im geussin they have gone up a bit, 84s are the most desirable becouse the housing truss runs all the way ender the spring perch on the long side, dont forget gears and lockers!
if you were right, dont you think i'd agree with you?

*

Offline Hillbillydave

  • 213
  • 1
  • Gender: Male
Re: Toyota axles on my 02 tracker
« Reply #2 on: September 19, 2008, 07:55:19 PM »
I would get them if I was close enough! ;)
Those axles should be very close to the width you need to fit your tracker. The tracker rear ends are centered. The front axle will have to be four-linked or leaf sprung. There are kits out there to do the swap, check out the sponsers of this site to find the kits.
'89 sidekick 1.3L 3" blue suspension parts, custom strut extensions 31x10.5 Mud Trac's on 10" rims rear fenders trimmed, lincoln locked rear, Rochester Carb on custom adapter
93 Sammy project, SPOA with 34's, 5.12's, welded, in the works

*

Offline Amilla

  • 1076
  • 0
  • Gender: Male
  • Toyota running gear was made for a samurai!
Re: Toyota axles on my 02 tracker
« Reply #3 on: September 19, 2008, 08:09:59 PM »
Super good price front and rear!  And like Basher said the 84-85 front axles are the best to get.
If the price stays like it is, your getting one hell of a deal.

If you were to set it up with leaf springs you could do it pretty cheap and it wouldn't be to complicated.

Amilla
88 Samurai, Sprung Up, Geared Down, Locked,With Yotas.

*

Offline MaD.72

  • 183
  • 0
  • Gender: Male
  • It's not what you buy, it's what you built!!!
Re: Toyota axles on my 02 tracker
« Reply #4 on: September 20, 2008, 10:11:23 AM »
Check this site, they got alot of information on those kind of swap...

http://bbs.zuwharrie.com/content/board,71.0.html