i was wondering if anyone had this problem and if so how they fixed it if you even can.
i have a 94 4 door sidekick.every 3 months or so my throw out bearing gets thrown off the clutch for its beggining to be a pain in the ass because i have to drop the tranny and i replace the throw out bearing everytime i do this does anyone have any idea what can cause this.lmk if anyone has any ideas

mod list: if it helps

engine: miles 225k

custom turbo set up |removethispart|@ 4-6psi( .50 trim turbonetics turbo,custom manifold)
stock internals
eclipse side mount intercooler
custom piping
hacked maf
apexi safc
boost controller
3in exhaust
turbo muffler
not cat
driveline

stock replacement clutch kit
stock gears
stock driveshafts
driveshaft spacers (lowrange offroad)

suspension

f150 4x4 springs
2in coil spacers
ome struts w/spacers
rancho shocks (4 runner 6 in lift)
3in body lift
no sway bar

im running 33x13.5x15 swampers w/1.5 in wheel spacers

sounds like someone is riding the clutch

why would the bearing grt thrown off the fork by riding it? when i pull the tranny it falls out as soon as the trans is seperated.i understand that riding the clutch would make the bearing go bad but not fall off

Check the clutch fork to make sure that its not bent.

As Rhinoman said, check the fork. 
good luck

Maby the fork is worn?

or

Have you ever had the resurfaced?  If too much material was removed, maby this could cause the fork to over travel and cause the bearing to pop out?  Just a thought.

Good luck

i pulled my trans today and its the fork its mangled now you cant even put a throw out bearing on it just falls right off thanks for all your help

I would love to see some pics under your hood. Me <3 Turbo 16V