Hello Guest
« previous next »
Pages: [1]   Go Down

Samurai Question?

  • 9 Replies
  • 1859 Views

0 Members and 1 Guest are viewing this topic.

*

Offline Asbury030

  • 85
  • 0
  • Gender: Male
Samurai Question?
« on: January 01, 2009, 01:41:57 PM »
Ok so I want to take the body off the frame of my samurai. I was just wondering what all I have to do to get this accomplished?
Logged
*

Offline Armour

  • 360
  • 0
  • Gender: Male
Re: Samurai Question?
« Reply #1 on: January 01, 2009, 04:34:43 PM »
Unbolt it! LOL! I am such a smartass!
Logged
89 Sidekick. 33's.  Lincoln Locker,4.24 T Case, 5.13 gears. Warn M8000 winch.
96 Tracker. 39.5's Locked 44's front and rear, 6.5 t case, 4.10 gears.
*

Offline Asbury030

  • 85
  • 0
  • Gender: Male
Re: Samurai Question?
« Reply #2 on: January 01, 2009, 04:45:26 PM »
haha I know that. Like do I have to take the motor out and the dash and how many bolts are there and where at? Im new to this as you can tell. What I wanna do is sand down the frame repaint it and put bed liner on it.
Logged
*

Offline Asbury030

  • 85
  • 0
  • Gender: Male
Re: Samurai Question?
« Reply #3 on: January 02, 2009, 03:34:21 PM »
Anyone?
Logged
*

Offline Drone637

  • 8121
  • 116
  • Gender: Male
  • Evil Cow
Re: Samurai Question?
« Reply #4 on: January 02, 2009, 03:41:01 PM »
I believe the FSM covers it. 

You have to pull the electrical running from the engine into the dash, the shifter, clutch and speedo cable need to be disconnected, and the emergency brake.  Radiator will have to be pulled along with where the steering box connects (the rag joint).  Then just unbolt everything like on a body lift.

I would just start lifting it up slowly at that point and see what you missed.  :)


« Last Edit: January 02, 2009, 04:45:46 PM by Drone637 »
Logged
96 Geo Tracker, x-SJ-410,  x-White Rabbit, x-Project Trouble
Crawlers NorthWest
x-Trouble Racing
*

Offline Asbury030

  • 85
  • 0
  • Gender: Male
Re: Samurai Question?
« Reply #5 on: January 02, 2009, 04:19:14 PM »
Ok cool thanks I appreciate it.
Logged
*

Offline Asbury030

  • 85
  • 0
  • Gender: Male
Re: Samurai Question?
« Reply #6 on: January 03, 2009, 08:41:53 AM »
How many bolts are there holding the body to the frame?
Logged
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: Samurai Question?
« Reply #7 on: January 03, 2009, 05:58:16 PM »
10 I believe
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
*

Offline idaholwb

  • 772
  • 2
  • Gender: Male
  • And that's the way the metal crumpled!
Re: Samurai Question?
« Reply #8 on: January 03, 2009, 06:06:56 PM »
 Don't forget the brakelines where they attach to the fenderwell...
Logged
97 Sport
265/70-16s
2" lift
2.0 swap
I know...Pretty boring... FOR NOW...
*

Offline ROSS

  • *
  • 1412
  • 0
  • Gender: Male
  • WHY TAKE A PICTURE WHEN YOU CAN DRIVE OVER IT
Re: Samurai Question?
« Reply #9 on: January 03, 2009, 08:12:57 PM »
note "the body to the frame"..   theres quite a few little things like vent hose to cannisterground wires fuel filler hose  but, he said bolts to frame
Logged
87 SAMI 1600 FUEL INJ. , TORQUER CAM, 6.5 TO 1T-CASE, 5"SPRINGS SHACKLE REVERSE ,2 BODY LIFT, LOCK-RITES FRONT W/ HEAVY-DUTY AXLES & ARB'S REAR  BFG 31 X10.50 X 16",  EXO SKELLETON,
Pages: [1]   Go Up
« previous next »