What all do i need for a 2 In body lift. i have the spacers but dont know what else is needed like extentions or how many spacers is there on the truck?

From what I understand, the fuel tank filler hose and brake lines need to be watched as you raise the body off the frame, that is about the only items to watch out for. I think a few wire harnesses may need their retaining clamps loosened to allow the lift

SR CUSTOMS has 2" body lifts on sale this month: http://www.srcustoms.ca/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=23&category_id=7&option=com_virtuemart&Itemid=56

that's a nice kit. are there 8 body mounts? how many does a trackick have?

drivers side front retainer clip for frt brakes has to be removed, fuel filler hose just has too be loosened shifters should have a piece of rod welded on so that everything goes back together and doesn't look ghetto and steering bolt has to be loosened off and only do one side at a time or your vehicle wont bolt back together properly thats all i can remember

that's a nice kit. are there 8 body mounts? how many does a trackick have?

Yes, 8. There is a spot on each side where there is a contact point between the body and frame. It is right under the rear seat(on top of the frame where it arches up over the rear axle)

Oh, and I'm assuming you have a 2 door...

that's a nice kit. are there 8 body mounts? how many does a trackick have?

Yes there are 8 body mounts and 4 body supports. Everything you need to install is supplied in the kit except bumper relocation brackets. Kit comes with instructions as well.

I Currently have a 2 door tin top. but trying to trade my dad for his 4 door sidekick. Just because I have a 10 month old son and 4 door makes it much easyer to put him in and out of.