I desperatly need some 5.13 ring and pinons front and rear!!! If anyone has them please let me know!!

try hawk

Already did, said they only sell as part of their hybrid axel setup.....I want to get my lift and stuff started but there is no point if i can't find any gears.  :-/

On ebay there is people that will say "parting out..." i would see if they can source soem gears for ya, i know i had a guy lined up to sell me the front 5.13 gears once but found em' cheaper, just use the ask seller a question link.       shane

Thanks, good idea. At least i'm not the only die hard online at 2 in the morning!!!

Is your Tracker an Auto  If not you allready have 5.12 gears.

hey i have been online for the last two weeks till like 2 or 3 in the morn.  just last night was sleep catch up.  lata stu

Yup it sure is the infamous 3 speed auto....blah....I need them before I will even think of putting bigger tires on.

my buddys auto did burnout with 32s.  I'd go with the lift/bigger tires first, you can always worry about it if you need it.  Most times I use 4low for offoading anyways, so Tou already have low gears.

Hmm....I dunno about that. I got the 16 valve motor, and When its stuck with the stock tires it wont even sping them in 4 low in the mud...maybe there is something else wrong with it.  Andrew

What are you calling bigger tires???
I run 33s on stock gears, ya you feel
it, if you want to go to 31s and use 5.12/5.13s
this will be close to stock on 205-75 15s

You got some $$ I can check to see if the
Track/Kick is still there, I want some parts
too so I need to go before they crush the
Trucklet, one is a Man trans, the other is auto.
some bonehead pulled the valve body off
the auto I wanted for a spare  

Lemme Know
Darrin

go for 32s at least, maybe 31s, you can do that cheaply with a 3 inch body lift.  Try to find 12.5 wide tires, helps you roll over stuff rather then sink in it.

That is precisely my plan, the 5.13's with a 31 or so. Do you run the 3 speed in your zuk? Its amazing the places I have taken my tracker stock so I can only imagine how much better it is with more ground clearance. Also yeah I have money, how much do you think the gears would be. Thanks Andrew

I was looking at the bds coil lift. My friend owns a shop that sells them I dunno how it will stack up to a calmini but It it will do the job rather well I think if I put the RRO 2 inch body lift in too. I would love to go with a 12.50 wide tire, but in New Hampshire where I live, you have to pass the quarter test where they put a quarter flat on the farthest point out  and drop it, if it hits your tire you get wacked with a 63 dollar fine and if they catch you again the impound the car until you get flairs on it. Andrew

I made a chep set of yj fenders work on mine, rear is switched side to side, front is cut into 3 sections, shortened at top where turnsignal was and extended down by rocker.  will post pics tomorrow.