Hello Guest
« previous next »
Pages: [1]   Go Down

rattle-can bedliners?

  • 10 Replies
  • 2027 Views

0 Members and 1 Guest are viewing this topic.

*

Offline thedeep

  • 50
  • 0
  • I Love ZUKIWORLD!
rattle-can bedliners?
« on: September 01, 2005, 08:59:30 AM »
Anyone had any luck using one of the rattle-can bedliners for places like inside the doors, and other hard to reach spots? Brands? Thanks.
Logged
*

Offline tracker8wr

  • 568
  • 0
  • Gender: Male
  • THE BIGGER THE BETTER
    • my home page
Re: rattle-can bedliners?
« Reply #1 on: September 01, 2005, 11:27:34 AM »
i used the wal-mart cheep stuff and it sucked on the inside. then i sanded it a bit and it worked great. however the best stuff is a brush on prduct it is sold at advanced auto parts. i have thorwn all kid of metal on top of it and it is not scratched or damaged.
Logged
4 1/2 body
Coil spacers
cheap but effective
31" LTB Swampers
http://www.geocities.com/race8thwonder01/ http://www.cardomain.com/memberpage/769479
*

Offline Digger

  • 1991
  • 1
  • Gender: Male
  • 1996 Suzuki X-90 4X4
Re: rattle-can bedliners?
« Reply #2 on: September 01, 2005, 11:49:57 AM »
I've used the spray stuff at Napa and it works pretty well for interior panels, but seems kind of soft for floors...
Logged
Had a cool sig pic till I changed the text... sigh...
90 Tracker: "Silver", 2" BL, 1-1/2" Coil Spacers, Strut mount flip, Calmini Header, Winch, 31" Swamper radials, Sold.
98 Suzuki X-90: Calmini 2" Sus, 1-1/4" whl spcrs, 2" Exhaust, Cobra Safari Bar, Neon, Sold.
96 Suzuki X-90: Mostly stock daily driver(for now)
*

Offline bandit86

  • 1641
  • 1
  • Gender: Male
  • elv8rguy
Re: rattle-can bedliners?
« Reply #3 on: September 01, 2005, 03:33:50 PM »
suckd... sun faded in 3 weeks.  never again.  the brush on hippo stuff is ok thogh, worth the extra labor.  dont put on bare metal  :(
Logged
TO BOLDLY GO WHERE NO JEEP HAS GONE BEFORE!
*

Offline aumtracker

  • 22
  • 0
  • the worm is the spice
Re: rattle-can bedliners?
« Reply #4 on: September 01, 2005, 05:25:08 PM »
the dupli-color  spray on is great i used it after i cleaned up my rocker panals it drys fast and cures hard it gets my vote!!!!!!!!!!!!!!!!!!!!!!!!!!!
Logged
*

Offline Digger

  • 1991
  • 1
  • Gender: Male
  • 1996 Suzuki X-90 4X4
Re: rattle-can bedliners?
« Reply #5 on: September 01, 2005, 05:52:58 PM »
I have been looking for some of the duplicolor stuff. Do any national chain stores carry it or will I have to order it?
Logged
Had a cool sig pic till I changed the text... sigh...
90 Tracker: "Silver", 2" BL, 1-1/2" Coil Spacers, Strut mount flip, Calmini Header, Winch, 31" Swamper radials, Sold.
98 Suzuki X-90: Calmini 2" Sus, 1-1/4" whl spcrs, 2" Exhaust, Cobra Safari Bar, Neon, Sold.
96 Suzuki X-90: Mostly stock daily driver(for now)
*

Offline adamd

  • 369
  • 0
  • Gender: Male
  • sofa king we todd it
Re: rattle-can bedliners?
« Reply #6 on: September 02, 2005, 04:36:39 AM »
Harder than paint, but not as good as roll on stuff
Logged
'98 kick
3" B/l
30" Mud Kings
*

Offline wildgoody

  • *
  • 8134
  • 67
  • Gender: Male
  • Turbocharged 150HP 1.6L 8V 93MPH 1/4 mile
Re: rattle-can bedliners?
« Reply #7 on: September 02, 2005, 07:57:53 AM »
I sprayed the rear inner bumper steel
part with either undercoating or truckbed
liner, maybe both, one was soft, one was
harder, either way it looked great, but
peels easy until it gets hard, if it ever goes
to a hard stage
Logged
Real Trucks Are Built, Not Bought,
And Chrome Don't Get Ya Home.  

An armed man is a citizen. An unarmed man is a subject.
*

Offline reb

  • 195
  • 0
  • Gender: Male
  • Victim of CRS--Can't Remember Anything.
Re: rattle-can bedliners?
« Reply #8 on: September 02, 2005, 11:43:06 AM »
Quote from: Digger on September 01, 2005, 05:52:58 PM
I have been looking for some of the duplicolor stuff. Do any national chain stores carry it or will I have to order it?

As I recall, wallymart carries Duplicolor.  I used some (brush-on, with some spray for touchup) on a pickup bed once.  Decided it was too soft for that. 
Logged
*

Offline MYJL

  • 11
  • 0
  • Gender: Male
  • GO Cowboys!!
Re: rattle-can bedliners?
« Reply #9 on: September 03, 2005, 02:46:58 PM »
I used the dupli color stuff on the inside of my samurai and it works fine for that.
Logged
1990 Samurai
*

Offline lil_Truck

  • 1148
  • 0
  • Gender: Male
  • Eric Gardner
Re: rattle-can bedliners?
« Reply #10 on: September 03, 2005, 04:15:08 PM »
I've learned you can't use the stuff on bare metal.  The metal has to have at least a primer.

Second, the paint must be roughed up for it to stick or it will peal off.

Using it right it's worked good for me.
Logged
e-mail: liltruck|removethispart|@comcast.net
96 Tracker
6" Calimini Lift with custom Frame
32 MTR's Warn 8000i
Front/Rear ARB's Many New Mods soon.
Pages: [1]   Go Up
« previous next »